Search the Community

Chambered in .223 Wylde – 1:8 Twist, 14.5 Inch Stainless Steel Barrel Price : £2,500 The rifle is brand new and has never been fired. This rifle has been an ongoing build of mine over the last two years, unfortunately due to personal circumstances I'm regrettably having to sell before I've been able to shoot it. Please see full spec below: · Lantac 7075-T6 Milled Upper and Lower receivers. · Lantac E-BCG Bolt Carrier Group with their domed head cam pin and spring assisted unlocking for a smoother action. Includes Lantac’s proprietary side charging handle with customizable grips. · Radian Raptor Ambidextrous Safety and Charging Handle. · Includes 1x Magpul PMAG Gen M3 30 Round Magazine Parts changed from the original rifle: · Geisslie SSA Trigger – 1st STAGE WEIGHT RANGE: 2.75 - 3 lbs. 2nd STAGE WEIGHT RANGE: 1.5 - 1.75 lbs. TOTAL PULL WEIGHT RANGE: 4.25 - 4.75 lb · Magpul MOE-SL Stock and K2 Grip · Geisslie MK16 M-LOK handguard (went for a Geisslie URGI look for the rifle with the tan handguard) · The rifle has been re-barreled by Dave Wylde at Valkyrie Rifles: 14.5 Inch Stainless Steel Barrel Chambered in .223 Wydle 1:8 twist - Threated 1/2x28 UNEF Finished in black Cerakote If broken in properly and hand loaded for, this will be miles more accurate than the factory Lantac Barrel. · I've loaded some low power test loads for breaking in the barrel which are included. Specs: PPU 55 Grain FMJ Bullet PPU .223 Case Magtech Primer 24.5 Grains Vihtavuori N140 Powder · I also have some rounds made up ready to load test for the rifle using the following components: 75gr PPU HPBT Match Bullet PPU .223 Case Magtech Primer Vihtavuori N140 Powder I'm happy to include these test loads with the rifle for free, the PPU stuff is plenty accurate when handloaded and doesn't break the bank like Lapua. I understand this is priced slightly higher than the base Lantac Rifle. However, with the new barrel and extra parts including the handguard, trigger, stock and grip the rifle has cost over £3500. PLEASE ENQUIRE FOR MORE PHOTO'S AND INFORMATION, THANKS FOR LOOKING! Located in Chinley, Derbyshire. I’m also happy to arrange RFD transfer at the buyers cost of £30. Contact: Jacob Taylor - 07885 419261 - jake.j.taylor321@gmail.com (if i don't answer the phone please leave a voicemail and I'll call you back, I may not answer as I do shift work)

ACOG TA11 Tactical Scope for sale. This is a genuine ACOG that has had some use, but is in very good overall condition. Please see pics for details. I'm looking for £350 ONO

for sale my ATI chassis system, i could do with some cash so is up for sale. these are about 250 pounds brand new im asking 130ovno collected, might be able to post but box is large, doubt it would be at all cheap. stock is missing one screw out of six from along the top rail, no idea where this went but works just fine without (6 seems like overkill to me anyways haha) Ruger 10-22 seen in pics not included, Aimpoint also not included Features: AR-15 Replicate Polymer Receiver Chassis Receiver Shroud is comprised of Two Polymer Halves Includes all intricate features of the AR-15 Aluminum components mount to the receiver for added support Invisible parting lines Accepts any 10-25 round magazine Aluminum 6-Sided forend Aluminum FS8 Nose Cone Aluminum 21 picatinny rail ability to mount accessories Six Position Adjustable TracLOCK System Eliminates Horizontal and Vertical Movement of the Stock on the Buffer Tube Provides Smooth Secure Stock Adjustments Eliminates the Need for Secondary Locking Mechanisms No Snag Points Thin Scorpion Recoil Pad Dual Sided QD Attachment Point Scorpion Recoil System Thin Scorpion Recoil Pad Non-Slip, Removable Scorpion Recoil Pistol Grip Sure-Grip Texture Recoil Impact is Absorbed Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift Not Affected by Chemicals Remains Flexible in Extreme Temperatures Eliminates the Felt Punch of the Recoil Removes Limitations from Spring and Piston Type Recoil Suppression Systems T2 Style Pistol grip Lowers shooters hand to align your finger with trigger Extended Scorpion Material to Reduce Recoil and Discomfort to the Shooters Hand and Thumb Sure-Grip Texture Eliminates the Felt Punch of the Recoil Made in the USA Limited Lifetime Warranty Fits Most Ruger 1022 with standard barrel or bull barrel

Brand new in box Magpul MOE AR replacement grip-colour flat dark earth. This has never been mounted on a weapon-I ordered two in error so this one is spare. Note this is not the cheaper PTS air soft version it's the genuine Magpul part for real firearms so is made of mil-spec materials. Comes in box with bag, mounting screw and sticker. £25 delivered. Description below: Replacement for AR15/M4 pistol-grip One-piece reinforced polymer construction with wrap-around rubber overmolding Beavertail backstrap for enhanced ergonomics Hard-polymer bottom edge to reduce equipment snags or grip damage Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included. 
 Technical Information Weight, w/hardware: 3.4 oz Height, receiver to bottom: 4.0" Thickness, max: 1.2" 
 NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.