Logun lamp

[countryman]

So I get a Logun lamp from my daughter for christmas but the quick release bracket that mounts it to the scope wont open wide enough to go around an AGS Swat scope which is a bit surprising really because I thought AGS and Logun were the same company. Ive put a longer screw in to clamp it togather but the trouble with this is that it does away with the quick release clamp which means I need a screw driver to get it on an off each time.

Anyone else come across this problem with remedies?

Thanks

Chris

[drut]

Not exactly the same problem but I have used a logun lamp on a Baikal single .410,used some bits of plastic pipe(cut in half) to sleeve barrel up to correct size,suppose you could do

the same with an airrifle barrel.

[countryman]

Thanks, i think i will have to make something as well.

Chris.

[anim al]

this is what my m8 and i did,

got a scope adaptor like this

 

cut off where shown and drill a hole through centre.

take quick release off logun and then screw the cut piece of bracket to the lamp.

put the scope bracket on scope and then the lamp will fasten to it,,,,on and off in seconds

hope this helps

 

cheers al

[countryman]

Thanks anim al, that will do the job.

Cheers

Chris