ads03ads Posted April 22, 2010 Report Share Posted April 22, 2010 Hi all, Does anybody out there have any recipes for subsonic .410 loads, prefrably 3" and fibre wad. Have a few loads for 2" cases but ideally would like to get as much lead in the air as possible!!!! Many thanks in advance Ads Quote Link to comment Share on other sites More sharing options...
sitsinhedges Posted April 23, 2010 Report Share Posted April 23, 2010 Hi all,Does anybody out there have any recipes for subsonic .410 loads, prefrably 3" and fibre wad. Have a few loads for 2" cases but ideally would like to get as much lead in the air as possible!!!! Many thanks in advance Ads What powder are you looking to use? Quote Link to comment Share on other sites More sharing options...
ads03ads Posted April 23, 2010 Author Report Share Posted April 23, 2010 Hi sitsinhedges, I'm open to discussion really, not had that much experience loading for the .410. Most of the loads I have found for the 2" subs have been using vectan sp3 and to be honest vectan powders will be the easiest to pick up for me as its what the local supplier has!!! But as I said if you know of something better then I'm open to be talked into it. Cheers Ads Quote Link to comment Share on other sites More sharing options...
sitsinhedges Posted April 23, 2010 Report Share Posted April 23, 2010 Claygame will email you recipes for any gauge for a £1 each, probably the safest way http://www.claygame.co.uk/email1.php Quote Link to comment Share on other sites More sharing options...
Andy H Posted April 23, 2010 Report Share Posted April 23, 2010 Cx 50 primer , 12 grains sp3 , 21 grams in a 3" shell with a gualandi micro H 17wad = 1050 fps Quote Link to comment Share on other sites More sharing options...
ads03ads Posted April 24, 2010 Author Report Share Posted April 24, 2010 Cheers Andy, I don't suppose you've any recipes with a fibre wad? its for the little hushpower you see and they really don't like the plastic ones Sitsinhedges thank you but I have tried Ian at clay and game and the only fibre wad loads he had were in 2" Doh! Cheers ads Quote Link to comment Share on other sites More sharing options...
sitsinhedges Posted April 24, 2010 Report Share Posted April 24, 2010 Cheers Andy,I don't suppose you've any recipes with a fibre wad? its for the little hushpower you see and they really don't like the plastic ones Sitsinhedges thank you but I have tried Ian at clay and game and the only fibre wad loads he had were in 2" Doh! Cheers ads Guilandi H17 wads work fine in a moderated gun because the are just a gas seal without any real cup to open up and stick in the baffles. I've used plenty without a problem Quote Link to comment Share on other sites More sharing options...
ads03ads Posted April 24, 2010 Author Report Share Posted April 24, 2010 Cheers Sitsinhedges, its good to know that you can use the H17's as I've got a couple of recipes for subs using these. You learn something knew every day :unsure: Ads Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.