the enigma Posted March 2, 2011 Report Share Posted March 2, 2011 This is a bit of a dumb question. I'm changing the chokes in my Lanber for the first time. Have you any tips or advice?.... Or is it just a case of checking them to make sure they stay tight? Quote Link to comment Share on other sites More sharing options...
mfletch Posted March 2, 2011 Report Share Posted March 2, 2011 Make sure the threads are clean and wipe over with a oily cloth then install not to tight Quote Link to comment Share on other sites More sharing options...
J@mes Posted March 2, 2011 Report Share Posted March 2, 2011 make sure the gun is unloaded. make sure the threads are correctly seated. Crossthreading will cost you money. nip them up hand tight, no need to lean on the spanner. Quote Link to comment Share on other sites More sharing options...
the enigma Posted March 3, 2011 Author Report Share Posted March 3, 2011 Cheers fellas. Quote Link to comment Share on other sites More sharing options...
Guest cookoff013 Posted March 3, 2011 Report Share Posted March 3, 2011 use grease aswell, makes them fit snug, and be able to loosen them later. (this tip will save you £) after clean the excess grease off the bores. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.