mightyrover Posted May 20, 2011 Report Share Posted May 20, 2011 As my last post i had a bit of bother with my hw100 barrel.The barrel is now sorted but after a day the pressure has all gone out of the reserve.But its fine if i charge it up and leave it off the gun. Quote Link to comment Share on other sites More sharing options...
HEAD SHOT NO1 Posted May 21, 2011 Report Share Posted May 21, 2011 reserve? you mean the air cylinder is losing air? Not owned the hw but it might be that your air reseviour is ok but seals in the action are CAPUT Is it hissing when connected?Could be a number of things and dont even think about sending it hull cartriddge lol as you may never see it again lol.you need a hw guy to take a look,could be a problem with trigger/sear/hammer,im guessing more to a seal,may be blown. You need a HW strip guide video to investigate,id replace seals while there. Quote Link to comment Share on other sites More sharing options...
snipper Posted May 22, 2011 Report Share Posted May 22, 2011 first port of call would be the small oring where the cylinder screws onto the gun from memory the size is BS005 ( 2.57x1.78) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.