nosibod Posted October 27, 2011 Report Share Posted October 27, 2011 (edited) I have read all sorts of thing about keeping my walnut stock oiled or waxed what do you think. Edited October 27, 2011 by nosibod Quote Link to comment Share on other sites More sharing options...
turbo33 Posted October 27, 2011 Report Share Posted October 27, 2011 Wax CCL oil Quote Link to comment Share on other sites More sharing options...
Farmer-of-the-Futre Posted October 27, 2011 Report Share Posted October 27, 2011 Similar question, i dont want to make a new thread on it! I have been stripping the stock on a beech bsa mercury and has anyone got any reccomendations for what i can use on it? Thanks Quote Link to comment Share on other sites More sharing options...
mad1 Posted October 27, 2011 Report Share Posted October 27, 2011 I found teak oil gave a better finish and much cleaner to use than truoil Quote Link to comment Share on other sites More sharing options...
brett1985 Posted October 28, 2011 Report Share Posted October 28, 2011 ive refurbished several beech bsa meteor stocks in the last 12 months, and used the same sequence on all of them with good results. strip back to bare wood, using several grades of sand paper (getting finer each time) finish off with 1500 grit. go over once with very fine wire wool. i use red root oil on mine, put some in the palm of your hand and rub into stock hard enough to produce some heat. repeat once a day for 3-5 days dependant on how dark you want it. leave to dry completely somewhere warm for 2 days. then finish with several coats of clear bri-wax. works very, very well. here's some pics of my last restoration i did. brett Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.