crosswaters Posted January 4, 2012 Report Share Posted January 4, 2012 Browning fusion gold.... Just got this gun for pigeon shooting and a bit of clay shooting,last week when using gun I had quite a few problems with the gun not recycling the carts it fires first shot ok then sticks. Anyone got a semi auto of this type and any thoughts to fix the problem. cheers H Quote Link to comment Share on other sites More sharing options...
super sharp shooter Posted January 4, 2012 Report Share Posted January 4, 2012 (edited) Hi mate I had the browning fusion and had cycling issues and it went back to browning twice to be fixed. Both times it came back and it still wouldn't cycle. I did find that when shooting clay loads the best cartridge I found to use were Kent velocity and didn't get many jams with them. Not sure what carts you are using but try to use 70mm and not 65mm hope this helps. Ps when you clean it make sure you only put a very little amount of oil on the moving parts. Edited January 4, 2012 by super sharp shooter Quote Link to comment Share on other sites More sharing options...
chris t Posted January 4, 2012 Report Share Posted January 4, 2012 if it's anything like my beretta urika 2 (ie gas driven): as said use 70mm carts. If new, they may take a bit of time to 'work in' Also make sure the gas piston area is clean and dry, don't put any oil around this area. Or else the oil and burnt gases get together and jam everything up. A clean and a few drops of oil around the bolt area where metal slides against metal helps alot. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.