alendil Posted January 23, 2012 Report Share Posted January 23, 2012 hello just have strip of my s410 and when i pull out barrel i notice there was some kind of glue or some kind of sealant. any idea what to use to put it together back . Quote Link to comment Share on other sites More sharing options...
wyatt Posted January 23, 2012 Report Share Posted January 23, 2012 Have you tried the Air Arms Owners Club Forum? They've loads of guides and may have some more information that'll be of use? http://www.airarmsownersclub.com/ Quote Link to comment Share on other sites More sharing options...
alendil Posted January 24, 2012 Author Report Share Posted January 24, 2012 i did but i am not able to register there because my email address is not suitable ( that is system msg when i try) Quote Link to comment Share on other sites More sharing options...
alendil Posted January 24, 2012 Author Report Share Posted January 24, 2012 any one hiere have strip down guide etc. Quote Link to comment Share on other sites More sharing options...
Beretta28g Posted January 24, 2012 Report Share Posted January 24, 2012 PM Gnome of the Woods Quote Link to comment Share on other sites More sharing options...
brett1985 Posted January 25, 2012 Report Share Posted January 25, 2012 you will be able to put it back together without the use of sealent, you just need to be sure that when it goes back in to the block assembly that the hole in the brass end that fits the barrell and goes into the block lines up with the hole on the bottom of the block or you will be down on power as it will restrict the airflow.... Quote Link to comment Share on other sites More sharing options...
alendil Posted January 26, 2012 Author Report Share Posted January 26, 2012 ok thank you Quote Link to comment Share on other sites More sharing options...
supadonk Posted January 29, 2012 Report Share Posted January 29, 2012 ok thank you will try to send schematic off air arms site atb Quote Link to comment Share on other sites More sharing options...
alendil Posted February 7, 2012 Author Report Share Posted February 7, 2012 so gun was clean and put together and tested on chrono. its puting only 9,4 lb so is there any one who can tune it up to 11.5 Quote Link to comment Share on other sites More sharing options...
brett1985 Posted February 7, 2012 Report Share Posted February 7, 2012 if you want to, and your happy doing it, you can send me the action and charging end without the stock and i can sort it out for you. shouldnt take too long, i can strip and service one in less than 45 minutes....lol. up to you mate! regards, brett Quote Link to comment Share on other sites More sharing options...
alendil Posted February 9, 2012 Author Report Share Posted February 9, 2012 and how much it will cost to set it up to 11.5 lb Quote Link to comment Share on other sites More sharing options...
brett1985 Posted February 9, 2012 Report Share Posted February 9, 2012 (edited) entirely depends on whats wrong with it buddy! it could be any number of things... i assume you changed all of the seals when you stripped it, so its probably something simple. if you cover the postage, i'll set it up for £20, for another £20 i'll polish the internals and supply and fit the trigger mod which will make the gun alot easier to cock and cycle and give the trigger a nice crisp feel to it. after its done, i'll chrono it with several types of pellet and make sure its legal. it would be helpfull if you could send some of your favourite pellet that you usually use too. i did the above mods to all of mine and it really does make alot of difference! regards, brett Edited February 9, 2012 by brett1985 Quote Link to comment Share on other sites More sharing options...
rallyrus Posted February 15, 2012 Report Share Posted February 15, 2012 Where do you live?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.