bfg1980 Posted August 1, 2012 Report Share Posted August 1, 2012 Hi All I am stuck on what to buy that feels right and with the righ scope etc, this feels right but no nothing about them. I have looked at the below, SEE PICTURE [*]The Mark II Savage BVTS .22 [*]AccuTrigger as a standard feature. [*]Natural High Luster Stainless Steel Barrel with a Natural Satin Wood Laminate Stock. [*]manufactured in 2007, comes with a [*]satin finish sound moderator [*]Hawke Nighteye 3-9×50 IR Mil Dot scope and a [*]10-shot stainless magazine. Comes with a 6 month guarantee . Can any one help and let me know what they are like, its priced at £500 with out bi-pod Thanks Very Much Quote Link to comment Share on other sites More sharing options...
Amazed Posted August 1, 2012 Report Share Posted August 1, 2012 I have a savage mk2 it's older than that and is very accurate and nice to shoot. BUT bits are expensive there hard to mod the bolts are **** and any waxy rounds won't extract the trigger isn't so acu at all and needs to be modded(look on the tube for vid) would I get one again ? Probably not get a cz maybe a Lil less accurate (Grabs tin hat) but you will never notice bits are cheaper and better to mod too. Just for thort for 500 notes you can get a finfire if you can find one Quote Link to comment Share on other sites More sharing options...
fruitloop Posted August 1, 2012 Report Share Posted August 1, 2012 i had a mk2 only reson i got rid was i wanterd a lh er Quote Link to comment Share on other sites More sharing options...
bfg1980 Posted August 1, 2012 Author Report Share Posted August 1, 2012 Great thanks Quote Link to comment Share on other sites More sharing options...
bfg1980 Posted August 1, 2012 Author Report Share Posted August 1, 2012 What did u think to it, @ fruitloop Quote Link to comment Share on other sites More sharing options...
eccles Posted August 1, 2012 Report Share Posted August 1, 2012 Got one in HMR great rifles.Trigger is fantastic and accurate. Quote Link to comment Share on other sites More sharing options...
fruitloop Posted August 1, 2012 Report Share Posted August 1, 2012 (edited) it was a good all rounder light easy to work with spot on was the down fall of a few rabits and a hare as i say the only reson i sold it was it was a right hander and i only paid £190 for it but it had not got the thumb hole stock on it. for the mags try these £25 for a 5 and £26 for a 10 when thay have them in http://www.cz-magazines.com/ or http://www.countrymanofderby.co.uk/ Edited August 1, 2012 by fruitloop Quote Link to comment Share on other sites More sharing options...
bfg1980 Posted August 1, 2012 Author Report Share Posted August 1, 2012 Eccles do u think this is good money Quote Link to comment Share on other sites More sharing options...
Amazed Posted August 1, 2012 Report Share Posted August 1, 2012 I may winge about mine but it's a great gun really. Its just done me proud tonight n downed a few in the rain n all for a new gun with a scope and mod isn't bad se if you can get a few rounds and a spare mag thrown in try it with cci s if you get any bother with winchesters being waxy Quote Link to comment Share on other sites More sharing options...
bfg1980 Posted August 1, 2012 Author Report Share Posted August 1, 2012 Amazed, great thanks, what don't think to the scope? I have Ely subsonic hollo points are they any good Quote Link to comment Share on other sites More sharing options...
Amazed Posted August 2, 2012 Report Share Posted August 2, 2012 (edited) They shoot fine in mine just give them a bit of a wipe with an old towel first to take some of the wax off n they should extract ok. The scope will be fine it's nothing special it's what's on mine at the min but with a 44 mill lense I keep mine on 6 x mag for most n go down to 3x in the late evening have fun pal. Being a new gun I would give it a good clean before you take it out as its full of packing grease it's up to you but it's what I was told to do Edited August 2, 2012 by Amazed Quote Link to comment Share on other sites More sharing options...
bfg1980 Posted August 2, 2012 Author Report Share Posted August 2, 2012 Thanks every one for your help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.