Mr Rizzini Posted December 23, 2012 Report Share Posted December 23, 2012 Anyone have any ideas how to diy something similar to this so I can attach my decoys to the magnet/bouncers or will I hav to get the welder going? http://i.ebayimg.com/02/%21BSqNCwwBmk%7E$%28KGrHgoOKkYEjlLmY4pPBKEViLSdzw%7E%7E_1.JPG Quote Link to comment Share on other sites More sharing options...
THE AD Posted December 23, 2012 Report Share Posted December 23, 2012 (edited) How much do they cost,may be cheaper to buy them and cut the plate off?? What's the item number. Edited December 23, 2012 by THE AD Quote Link to comment Share on other sites More sharing options...
Mr Rizzini Posted December 23, 2012 Author Report Share Posted December 23, 2012 work out about £5.50 posted to me, I would need the plate on them. Quote Link to comment Share on other sites More sharing options...
THE AD Posted December 23, 2012 Report Share Posted December 23, 2012 What they called or the item number. Quote Link to comment Share on other sites More sharing options...
Mr Rizzini Posted December 23, 2012 Author Report Share Posted December 23, 2012 here you go mate http://www.ebay.co.uk/itm/MOUNTING-BRACKET-FOR-AIR-PRO-PIGEON-WINGS-UPGRADE-DECOY-/200343569406?pt=UK_SportingGoods_Hunting_ShootingSports_ET&hash=item2ea56843fe Quote Link to comment Share on other sites More sharing options...
aga man Posted December 23, 2012 Report Share Posted December 23, 2012 (edited) not sure if this helps mate. this is how i made the extendable arms on my home made magnet. basically a nut welded over a drilled hole, then a bolt to suit the nut with a bar welded to the bolt head for tightening. {if that makes sense}. not pretty but it works. Edited December 23, 2012 by aga man Quote Link to comment Share on other sites More sharing options...
Mr Rizzini Posted December 24, 2012 Author Report Share Posted December 24, 2012 not sure if this helps mate. this is how i made the extendable arms on my home made magnet. basically a nut welded over a drilled hole, then a bolt to suit the nut with a bar welded to the bolt head for tightening. {if that makes sense}. not pretty but it works. cheers for the reply mate, Think I will tap and die it and will save me using a nut at all, I threaded an old tent peg so they may be my thumb screw Quote Link to comment Share on other sites More sharing options...
alros01 Posted December 25, 2012 Report Share Posted December 25, 2012 Hi the bracket in your picture is the one that's fitted to the air pro decoys I made some plastic decoys to fit on my rotary.just take the wing spreaders off drill four holes in the top of the decoy and thread a cable tie through each hole leaving a loop inside the body for the floater arm to thread through to hold it in place Quote Link to comment Share on other sites More sharing options...
Mr Rizzini Posted December 25, 2012 Author Report Share Posted December 25, 2012 do they not spin round any on the cable tie's? Quote Link to comment Share on other sites More sharing options...
alros01 Posted December 30, 2012 Report Share Posted December 30, 2012 hi no the decoy never span round when I used them and I had them on the rotary with no speed controller Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.