clakk Posted February 3, 2013 Report Share Posted February 3, 2013 (edited) going to make a shotmaker size 6.anyone used .8mm mig welding tips or do u all use 4mm bolts drilled .7mm hole.from a keen but confused peeps Edited February 3, 2013 by clakk Quote Link to comment Share on other sites More sharing options...
northeastshooter Posted February 3, 2013 Report Share Posted February 3, 2013 im in the process of making one and with the few tests i did last week i managed to get the lead flowing thru the .8mm tip if you bore it out so there is only a couple of mm of .8 if that makes sence couldnt get it flowing thru the .6 tho. thats just with what i tried last week hope this helps n.e.s Quote Link to comment Share on other sites More sharing options...
sitsinhedges Posted February 3, 2013 Report Share Posted February 3, 2013 mig tips will take the lead too far from the shotmaker and need a longer ramp. You want to keep everything in close where it will hold the heat or the lead wont run well. Checkout the new shotmaker sticky Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.