cremator Posted April 7, 2013 Report Share Posted April 7, 2013 (edited) ok hi so bought a brand new breretta extreme semi auto been out with it today shot a few pigeons great gun other than worrying about picking it up in case the camo on it starts to wear off i can not get to grips with unloading it manged to do it when finshed but made a bit of a mess got cartridge jammed but manged to get it out the book that came with it is not that clear well to me anyway any help would be great please i have had a semi auto before but this one as a catch to the left of the stock and one under where the carrier is many thanks Edited April 7, 2013 by cremator Quote Link to comment Share on other sites More sharing options...
OvEr_KiLL Posted April 7, 2013 Report Share Posted April 7, 2013 (edited) just keep pulling the bolt back until you eject them all thats what i do on my escort Edited April 7, 2013 by OvEr_KiLL Quote Link to comment Share on other sites More sharing options...
fenboy Posted April 7, 2013 Report Share Posted April 7, 2013 There should be a button on the right hand side , the one the closes the bolt , slightly push the head of the cartridge in the mag and press this button and the cartridge will come out of the magazine , repeat and remove the last one in the mag, then press in the little button in front of the trigger, pull back the bolt and it will eject the final cartridge. Quote Link to comment Share on other sites More sharing options...
Tam Posted April 7, 2013 Report Share Posted April 7, 2013 Hold the base plate up with your thumb & press the bolt release button & it will empty the magazine - press the small square doofur in front of the trigger in the floor plate, pull the bolt back & the chambers empty & bolt held back Quote Link to comment Share on other sites More sharing options...
cremator Posted April 7, 2013 Author Report Share Posted April 7, 2013 tryed that it dont work like that Hold the base plate up with your thumb & press the bolt release button & it will empty the magazine - press the small square doofur in front of the trigger in the floor plate, pull the bolt back & the chambers empty & bolt held back ah now that sounds more like t Quote Link to comment Share on other sites More sharing options...
Tam Posted April 7, 2013 Report Share Posted April 7, 2013 There should be a button on the right hand side , the one the closes the bolt , slightly push the head of the cartridge in the mag and press this button and the cartridge will come out of the magazine , repeat and remove the last one in the mag, then press in the little button in front of the trigger, pull back the bolt and it will eject the final cartridge. Dohh, typing at the same time :lol: You don't need to touch the shell - it will spit out A tip when loading the magazine - hold the floor plate up with your thumb you will learn when you take the skin off behind your nail Quote Link to comment Share on other sites More sharing options...
cremator Posted April 7, 2013 Author Report Share Posted April 7, 2013 no it dont work Quote Link to comment Share on other sites More sharing options...
fenboy Posted April 7, 2013 Report Share Posted April 7, 2013 Dohh, typing at the same time :lol: You don't need to touch the shell - it will spit out A tip when loading the magazine - hold the floor plate up with your thumb you will learn when you take the skin off behind your nail Yes thinking about it your right , you dont need to press the shell , just push the carrier up , I was having to sit thinking about it as it has become second nature. no it dont work You are pressing the round button on the right not the flat one on the left ? Quote Link to comment Share on other sites More sharing options...
cremator Posted April 7, 2013 Author Report Share Posted April 7, 2013 Yes thinking about it your right , you dont need to press the shell , just push the carrier up , I was having to sit thinking about it as it has become second nature. there is a button on the carrier button on left of stock and the bolt close button on right of stock Quote Link to comment Share on other sites More sharing options...
Tam Posted April 7, 2013 Report Share Posted April 7, 2013 Hold the carrier up & press the bolt close on right of stock to empty magazine, then press button on carrier & pull bolt back to empty chamber - if that don't work then it's broke. I will give you £50 for it & you can go & buy a "Hatstand" :lol: Quote Link to comment Share on other sites More sharing options...
fenboy Posted April 7, 2013 Report Share Posted April 7, 2013 (edited) there is a button on the carrier button on left of stock and the bolt close button on right of stock Yes you need to push the carrier bar up ( the bit you slide your cartridge along to load underneath ) up and press the button that is on the right side to unload while holding the carrier bar up. Then push in the small square one under the bottom of the gun and pull the bolt back to eject the one thats loaded Dont sell him it , I will give you £65 Edited April 7, 2013 by fenboy Quote Link to comment Share on other sites More sharing options...
cremator Posted April 7, 2013 Author Report Share Posted April 7, 2013 (edited) the carrier wont go up unles i push the button on the carrier and when i do that it ejects around from the tube Edited April 7, 2013 by cremator Quote Link to comment Share on other sites More sharing options...
Tam Posted April 7, 2013 Report Share Posted April 7, 2013 Make sure the bolt is closed & the carrier will go up Quote Link to comment Share on other sites More sharing options...
fenboy Posted April 7, 2013 Report Share Posted April 7, 2013 (edited) Right I am getting confused , are you confusing bolt with carrier, the carrier is the bit underneath the bolt is the bit with the small handle sticking out. With the bolt closed , then press the round button while holding up the carrier then the shell will eject from the tube (magazine) repeat once for each shell loaded in the tube , once you have done that then press the small square button thats just in front of the trigger, then pull the bolt back to eject the loaded shell. Edited April 7, 2013 by fenboy Quote Link to comment Share on other sites More sharing options...
cremator Posted April 7, 2013 Author Report Share Posted April 7, 2013 ah bingo yes worked got it thank you all only thing is blown hole in kitchen roof now thank u all Quote Link to comment Share on other sites More sharing options...
fenboy Posted April 7, 2013 Report Share Posted April 7, 2013 Quote Link to comment Share on other sites More sharing options...
Tam Posted April 7, 2013 Report Share Posted April 7, 2013 (edited) Nearly had me doubting myself My £50 still stands & you can buy a Hatstand :whistling: Edited April 7, 2013 by Tam Quote Link to comment Share on other sites More sharing options...
cremator Posted April 7, 2013 Author Report Share Posted April 7, 2013 (edited) can you repair me roof thank guys :yahoo:was ejecting the one out of the barrel first and the bolt was locked back sorry Edited April 7, 2013 by cremator Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.