tedster Posted June 12, 2013 Report Share Posted June 12, 2013 Hi guys 1st post so be gentle, I've got a Docter Classic 2.5-10 x 48 scope on my .243 Remmy 700 SPS. The elevation only seems to travel for about half of the available adjustment? I'm using the standard Remington mounts, which may or may not be a factor. What do you guys reckon? Cheers Ted Quote Link to comment Share on other sites More sharing options...
al4x Posted June 12, 2013 Report Share Posted June 12, 2013 so basically the POI moves but for only half the clicks then as you turn the turret the POI stays the same? if so you need to send it back for repair Quote Link to comment Share on other sites More sharing options...
fruitloop Posted June 12, 2013 Report Share Posted June 12, 2013 Is yr windage over to one side as that will reduce elevation. Centralises the windage turet then check the elevation Quote Link to comment Share on other sites More sharing options...
tedster Posted June 12, 2013 Author Report Share Posted June 12, 2013 so basically the POI moves but for only half the clicks then as you turn the turret the POI stays the same? if so you need to send it back for repair Aye that's right... It was a faulty scope, RFD refunded me but sold me a Weaver 4-20x50 Tactical plus mounts instead! Thanks for your help guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.