b16jus Posted September 6, 2013 Report Share Posted September 6, 2013 Ive seen a shell which is basically a laser pointer but in a shell Does anyone know if you can buy in .22 form ? J Quote Link to comment Share on other sites More sharing options...
station Posted September 6, 2013 Report Share Posted September 6, 2013 Seen them for .222 and bigger, but not for .22 LR Try www.bushwear.co.uk And put in their search box Sight-rite Quote Link to comment Share on other sites More sharing options...
deershooter Posted September 6, 2013 Report Share Posted September 6, 2013 Don't think they are available in .22 rf unless you get one that goes in the barrel the chamber is too small for the batteries Deershooter Quote Link to comment Share on other sites More sharing options...
Colc08 Posted September 6, 2013 Report Share Posted September 6, 2013 Was just looking at these on eBay today. You can get a kinda long nose wand type thing and looks like you take your bolt out and slide it in from the back. Be interested to know if they are any good. Quote Link to comment Share on other sites More sharing options...
1066 Posted September 6, 2013 Report Share Posted September 6, 2013 I really can't see the point - If you have a bolt rifle then sticking it on a sandbag and bore-sighting will get you pretty near, all you need is for the first shot to get you on the paper, then you're home and dry. Here's a short video of how to easily zero your scope. I shot this with my phone camera so not the highest quality. https://www.youtube.com/watch?v=qwD5zu7yTeI Quote Link to comment Share on other sites More sharing options...
dadioles Posted September 6, 2013 Report Share Posted September 6, 2013 I agree with 1066. Rimfire is cheap and easy to zero without needing any gizzmos. It can also help to remove the bolt and simply look down (through) the barrel towards a target so you know exactly where it is pointing. That is all the laser is doing. Quote Link to comment Share on other sites More sharing options...
Andy H Posted September 7, 2013 Report Share Posted September 7, 2013 Was just looking at these on eBay today. You can get a kinda long nose wand type thing and looks like you take your bolt out and slide it in from the back. Be interested to know if they are any good. You do not take the bolt out you insert it into the muzzle end. Quote Link to comment Share on other sites More sharing options...
Gimlet Posted September 7, 2013 Report Share Posted September 7, 2013 (edited) I don't think they're much use for CFs either. The ones I've used - the cartridge type and the muzzle insert type - only produce any kind of precision at close range - 50 yds or less. If you're that unsure of your zero go down to 25 yards and start again. Almost any cartridge rifle will be somewhere around an inch low at 25 yards if zeroed for a hunting range appropriate to the calibre. Start at that, move out to 50, check and adjust then move out to 100 or whatever your zero will be. Unless there is something wildly wrong with the scope or the mounting anything will be on the paper at 25 yds. A .308 zeroed for 1000 yards will be on an A4 sheet at 25. Just. A mate of mine has a lazer sighter. He only uses it when he goes hunting overseas. He'll do a basic zero check with it to make sure the rifle and scope have survived the flight intact, before fine tuning with live firing. Saves wasting a precious ammo allowance on re-zeroing if the rifle has been knocked about. Otherwise it never comes out of the box. For home use I reckon you're better off with a collimator. That's what I use when changing scopes. Just as accurate if used with care and one kit will cover all calibres. Edited September 7, 2013 by Gimlet Quote Link to comment Share on other sites More sharing options...
Andy H Posted September 7, 2013 Report Share Posted September 7, 2013 A collimator is what i use. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.