markbjones01 Posted October 3, 2013 Report Share Posted October 3, 2013 after loads of deliberating and watching loads of videos on the subject and because times are hard I decided to do a diy trigger job on my 10 22 as was not happy with the trigger pull. I polished the hammer and sear engagement and mindful of all the things that could go wrong just did a little at a time I was really chuffed I managed to get a sweet 3lb pull safety still working and put the gun together and went outside to test it, the first shot fired, shell ejected new round chambered pulled trigger but the hammer hadn't been charged, so I repeated several times and all still the same. when the trigger unit was out and I pulled the hammer back there was a very positive engagement so im at a loss as to whats gone wrong. as im off work sick I really cant afford to be buying a drop in unit so I was hoping if anyone on here who knows what they are on about please can you offer some advice thankyou mark Quote Link to comment Share on other sites More sharing options...
Bogwoppit Posted October 7, 2013 Report Share Posted October 7, 2013 Have a look at rimfirecentral.com forum You might find the answer on there. Bw Quote Link to comment Share on other sites More sharing options...
Underdog Posted October 7, 2013 Report Share Posted October 7, 2013 It maybe the intercepter....so long since I fiddled with one! The intercepter stops it from firing full auto and is released on forward travel of the trigger. maybe this part is fouled! Have another study of it. Not rocket science! U. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.