onelesscharlie Posted January 2, 2014 Report Share Posted January 2, 2014 Hi I am looking for load data for Ramshot XTerminator for use in a tikka t3 varmint in 223, will be used behind 52g A Max heads with CCI primers. Thanks for looking Colin Quote Link to comment Share on other sites More sharing options...
iain Posted January 16, 2014 Report Share Posted January 16, 2014 Go on to the ramshot website or email them. They will send the data. I use Tac in my .223. Looks to be a good powder but it's early days yet. Testing a few loads tomorrow. Quote Link to comment Share on other sites More sharing options...
ace32 Posted January 19, 2014 Report Share Posted January 19, 2014 Hiya Iain, how did you get on with the Tac,i got some loaded up to try in my 223,got some 52g 's to load up aswell,going to try extreme as I have some of that aswell,just wish the land would dry out a bit so we can get out, Ian Quote Link to comment Share on other sites More sharing options...
Amazed Posted January 19, 2014 Report Share Posted January 19, 2014 It's mustard in the 222 There is data for 52 grain on there just work it up with what you have. All the best Karl. Quote Link to comment Share on other sites More sharing options...
iain Posted January 20, 2014 Report Share Posted January 20, 2014 Hiya Iain, how did you get on with the Tac,i got some loaded up to try in my 223,got some 52g 's to load up aswell,going to try extreme as I have some of that aswell,just wish the land would dry out a bit so we can get out, Ian Turned to poo I'm afraid. Struggled to get 2" group. Been using some old 52 grain hornady HPBT match. Only problem is all are different lengths. Giving them up as a bad job and starting again with some 55 grain FMJs Quote Link to comment Share on other sites More sharing options...
Frenchieboy Posted January 20, 2014 Report Share Posted January 20, 2014 Here you go - Click on this link and then click on where it says "View Centerfire Metalic Load Guide Edition 5.0" and you should find all the data you need! http://www.ramshot.com/load-data/ I use Ramshot Wild Boar for my 303 and am very happy with the load I have worked up. I have to say that I haven't tried it with the .222 yet as I still have plenty of H4198 in stock. Quote Link to comment Share on other sites More sharing options...
Amazed Posted January 20, 2014 Report Share Posted January 20, 2014 Here you go - Click on this link and then click on where it says "View Centerfire Metalic Load Guide Edition 5.0" and you should find all the data you need! http://www.ramshot.com/load-data/ I use Ramshot Wild Boar for my 303 and am very happy with the load I have worked up. I have to say that I haven't tried it with the .222 yet as I still have plenty of H4198 in stock. It seems to favour the 50s over the 40s in my short barrel mate Quote Link to comment Share on other sites More sharing options...
reggiegun Posted January 20, 2014 Report Share Posted January 20, 2014 Here you go - Click on this link and then click on where it says "View Centerfire Metalic Load Guide Edition 5.0" and you should find all the data you need! http://www.ramshot.com/load-data/ I use Ramshot Wild Boar for my 303 and am very happy with the load I have worked up. I have to say that I haven't tried it with the .222 yet as I still have plenty of H4198 in stock. Welcome back Frenchie, Where do you get your Ramshot powder from, I am after some Tac or xterminator, but Kranks is nearest supplier I can find. On another note, I think Lee may me your best mate again , has he been in touch. All The best, Reggiegun Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.