aister Posted February 9, 2014 Report Share Posted February 9, 2014 I bought a second hand lee full length sizing die in 308 a while back for a friend and it has been in my shed for a few months now. He has finally bought a 308 and when I had a look at the die the other night there was a film of rust inside the die and there seemed to be a lot of crud sticking inside it too. Can these dies be taken apart for cleaning? Or can you recommend a way of cleaning it, I reckon it is old lube that has gathered dust and gone hard. Thanks in advance for any help. Quote Link to comment Share on other sites More sharing options...
Dougy Posted February 10, 2014 Report Share Posted February 10, 2014 very fine wire wool then a metal polish brasso or solvol on a wooded dowel and drill. Quote Link to comment Share on other sites More sharing options...
Amazed Posted February 10, 2014 Report Share Posted February 10, 2014 I used some autosol and a Brillo pad worked a treat on some sh dies I got. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.