welshwizard Posted February 23, 2014 Report Share Posted February 23, 2014 I have a Falcon FN12 I bought from a member on another forum last year , had to strip it and clean lots of jammed up pellets out of the chamber /mag area , put it all back but cant get it to cock ,checked cylinder is full etc but no joy ? Quote Link to comment Share on other sites More sharing options...
snarepeg Posted February 23, 2014 Report Share Posted February 23, 2014 Either you have crewed the spring adjuster in to far, or did you take the trigger unit of? And it's now not catching? John Quote Link to comment Share on other sites More sharing options...
FalconFN Posted February 23, 2014 Report Share Posted February 23, 2014 As above, if you removed the trigger it is easy to then over tighten the alan bolt that holds the trigger block in place so it stops the catch from catching. - you can also split the alloy block. Quote Link to comment Share on other sites More sharing options...
welshwizard Posted February 26, 2014 Author Report Share Posted February 26, 2014 Yes I did remove the trigger , it was full of lead crud everywhere . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.