george123456789 Posted February 1, 2007 Report Share Posted February 1, 2007 does anybody know how to make the part of a floater that the dead bird sits in and has its wings spread out in?? any ideas greatly appreciated george Quote Link to comment Share on other sites More sharing options...
henry d Posted February 1, 2007 Report Share Posted February 1, 2007 Have you tried a search ?? Quote Link to comment Share on other sites More sharing options...
matthewpluck Posted February 1, 2007 Report Share Posted February 1, 2007 This is realy simple mate all you have to do is get a peice of steel round bar the same sort of diameter of a bike spoke and 450-500mm in lenth and bend it into a V shape,then get a couple of crocadile clips and attach to the ends of the V to clip the wings on. then atach a piece of tube 5-10mm ID (inside diameter) to the back of the V so you can put your pole into it then all you have to do is drill a hole in the peice of tube and cut a tread in it so you can put a bolt in to tighten to your pole.or if you dont want to youse crocadile clips just bend the ends of the V up to push through the wings. here is a pic: http://www.pinewoodsporting.com/itemdetail...171&CatID=6 Hope this helps matt. Quote Link to comment Share on other sites More sharing options...
george123456789 Posted February 2, 2007 Author Report Share Posted February 2, 2007 thanks very much! matt was very helpful! i didnt think it would be so easy... thanks anyway george Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.