jam1e Posted May 8, 2014 Report Share Posted May 8, 2014 Hi folks, I was about to order a nice "FEATHERWEIGHT THUMBHOLE TIKKA T3 DETACHABLE BOX MAG FACTORY BARREL CHANNEL" form Boyds when I thought I'd better check the distance of the action screws from centre to centre. The Boyds site states the distance as, "Center to Center of Action Screws: 7 5/32". My rifle is a Tikka T3 Hunter in .223 Remington with the varmint stock. I measured the distance from centre to centre of the action screws and it's just about bang on 7". So where do they get the 5/32" from. My very poor maths skills tell me that's 3.9mm, which is quite a difference! Perhaps I'm being a bit dim here and mis-reading something, so some constructive advice would be appreciated.... The link to the item is below - http://www.boydsgunstocks.com/product.htm?pid=54328&cat=1220 Cheers Jamie Quote Link to comment Share on other sites More sharing options...
V8 90 Posted May 8, 2014 Report Share Posted May 8, 2014 Get a GRS Jamie Quote Link to comment Share on other sites More sharing options...
jam1e Posted May 9, 2014 Author Report Share Posted May 9, 2014 Get a GRS Jamie They're very nice Norm, but I'm not loaded like you! No pun intended. Jamie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.