RingDove Posted October 10, 2014 Report Share Posted October 10, 2014 Does anyone know if it's possible to remove the head section / lense carrier from a T20 IR Illumination? Mine has a little wobble on the thread, which I think a bit of PTFE tape would sort out, but I can't get access to the thread to apply it. Quote Link to comment Share on other sites More sharing options...
telf Posted October 10, 2014 Report Share Posted October 10, 2014 unscrew the locking ring around the lens,take the lens out,i think theres a seal in there as well,then unscrew the head,left hand thread i think,drop it down over the body i think thats right ,its been a while since i did it,somebody will be along to correct me if im wrong there was a thread somewhere explaining it,but it may have been on the nv forum Quote Link to comment Share on other sites More sharing options...
activeviii Posted October 10, 2014 Report Share Posted October 10, 2014 Their all right hand threaded. Look in the lens hood and you will see 4 dimples. Pliers on two dimples and unscrew. Its a threads washer. Might take a bit to get it going as the o'ring tightens the thread. Pop lens out and the oring. Unscrew the hood and it will fall back over the battery housing. Quote Link to comment Share on other sites More sharing options...
telf Posted October 11, 2014 Report Share Posted October 11, 2014 Their all right hand threaded. Look in the lens hood and you will see 4 dimples. Pliers on two dimples and unscrew. Its a threads washer. Might take a bit to get it going as the o'ring tightens the thread. Pop lens out and the oring. Unscrew the hood and it will fall back over the battery housing. thankyou sir Quote Link to comment Share on other sites More sharing options...
RingDove Posted October 16, 2014 Author Report Share Posted October 16, 2014 Thanks guys, sorted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.