Dbw1shrops Posted November 26, 2014 Report Share Posted November 26, 2014 Hi all I am still getting problems with my remmy despite replacing a couple of items ( action spring, magazine spring and new style piston seal) I was out last week on my perm in the woods and shot at a pigeon and the cartridge fell out of the magazine onto the ground ? Lately I've found I load the chamber then close the action put the first cart in the magazine it doesn't feel right goin in ( quite stiff ) and put the third cart in the mag and that goes in fine it's really frustrating me now as I've tried to get the gun running sweet since I bought it and can't seem to get it running consistent, I'm using 70mm carts so I know it's not that I was thinking of getting a new extractor for it just to give it a try ( trial and error) any thoughts PW massive. Atb Dave Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted November 26, 2014 Report Share Posted November 26, 2014 Sounds a bit like Triggers broom! Quote Link to comment Share on other sites More sharing options...
Dbw1shrops Posted November 26, 2014 Author Report Share Posted November 26, 2014 Hi TC I only give £100 for it so in my mind it's worth throwing a bit of money at it, it's a nice gun and is a cracking tool on the pigeons when it's running right but I've never had a full day when it has cycled consistent ! Lol Atb Dave Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted November 26, 2014 Report Share Posted November 26, 2014 Yes I have two, one of which was a cheapy! Ended up getting a whole new set of guts from a donor gun, that sorted it out and they both work as well as each other now. Good luck Mate. Quote Link to comment Share on other sites More sharing options...
Dbw1shrops Posted November 26, 2014 Author Report Share Posted November 26, 2014 Cheers mate think I will need that good luck ! 👍 lol Atvb Dave Quote Link to comment Share on other sites More sharing options...
Daveo26 Posted November 26, 2014 Report Share Posted November 26, 2014 Midway uk sells loads of bits for these. Iv had two both battered but reliable Quote Link to comment Share on other sites More sharing options...
Dbw1shrops Posted November 26, 2014 Author Report Share Posted November 26, 2014 If only I knew what part it was that's causing me the problem ! Dave Quote Link to comment Share on other sites More sharing options...
Floating Chamber Posted November 26, 2014 Report Share Posted November 26, 2014 Where are you located? Pm me. Quote Link to comment Share on other sites More sharing options...
Dbw1shrops Posted November 26, 2014 Author Report Share Posted November 26, 2014 Pm,d you floating chamber 👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.