VULTURE Posted April 5, 2015 Report Share Posted April 5, 2015 Hi. Is it possible to remove a drawer from a snap on tool chest,something's fallen down the back and I can't get it out and it's stopping the bottom drawer from closing properly. Cheers. Vulture. Apologies if in wrong section. Quote Link to comment Share on other sites More sharing options...
Bitfitter Posted April 5, 2015 Report Share Posted April 5, 2015 Yes there are spring clips on the runners just pry one side at a time and the drawer will come out Quote Link to comment Share on other sites More sharing options...
michufc Posted April 5, 2015 Report Share Posted April 5, 2015 Yes there are spring clips on the runners just pry one side at a time and the drawer will come out +1 Quote Link to comment Share on other sites More sharing options...
linny Posted April 5, 2015 Report Share Posted April 5, 2015 angle grinder Quote Link to comment Share on other sites More sharing options...
Gordon R Posted April 5, 2015 Report Share Posted April 5, 2015 The spring clips normally just push in. Get a small screwdriver - look at the drawer runner - normally a slot with a metal clip inside. Push the metal clip and pull the drawer out. Replacement - just put the drawer in the runners and shut it. Quote Link to comment Share on other sites More sharing options...
VULTURE Posted April 5, 2015 Author Report Share Posted April 5, 2015 Hi. All sorted now, thanks for the replies, it was just a notebook that somehow got over the back of one of the drawers.nearly had to resort to the angle grinder lol. Cheers. Vulture Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.