roostshooter1 Posted February 8, 2017 Report Share Posted February 8, 2017 hello guys I have a daystate harrier running at 40ftlb and I have noticed that there is some movement in the barrel you can twist it ever so slightly in the breech theres no up and down or in and out movement any advise guys ben Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted February 8, 2017 Report Share Posted February 8, 2017 Is there not 2 little grubscrews on top of the breach block that hold the barrel tight? Quote Link to comment Share on other sites More sharing options...
roostshooter1 Posted February 8, 2017 Author Report Share Posted February 8, 2017 im not sure mate to be honest not had the scope off to check Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted February 8, 2017 Report Share Posted February 8, 2017 Should just be a case of whipping off the scope and tightening the grubscrews - something like 2.5 or 3mm Allen key I would think. If you completely remove one of the screws you should be able to (using a torch) see the "dimples" that locate the barrel/grubscrew that are drilled into the barrel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.