buze Posted October 17, 2017 Report Share Posted October 17, 2017 I've got a project gun I'd like to re-brown. So I'm not totally clueless on the process, but I've been wondering on how to make sure details and engraving are preserved when polishing... Also, the rib is 'curled' (ie, textured) -- how do you polish THAT without flattening it too much? FIY, the gun is not worth having done professionally, so I can definitely have a go at it... Quote Link to comment Share on other sites More sharing options...
peck Posted October 17, 2017 Report Share Posted October 17, 2017 I cannot see that you would remove any metal from your gun if you are just re browning it. The only time you would need to remove any detail would be if it was rusty and that would need removing before blueing. Quote Link to comment Share on other sites More sharing options...
buze Posted November 25, 2017 Author Report Share Posted November 25, 2017 I've proceeded with that project BTW. I eventually used a wire wheel to strip the engraving (gently, with a electric screw driver) and it came out all clean and sparkly very easily. I did the rest of the flat surfaces with sandpaper. I ended up with a nice surface (apart from the off 100 years old dings!). I'm using ferric oxide solution+isopropanol alcohol so it dries quicker, and coat the barrels, let it dry, 'wash' any deposit with a barely wet sponge, and coat again. Every 2 or 3 coating I let it dry fully and use 0000 steel wool to smooth the finish. Been doing that a few times, and plenty of places now look a nice deep chocolate, but it's not yet evenly smooth -- so I think I need to go over the hue I want, then smooth is all back to the same... So far it's been fun, if the barrels comes out as good as what I see starting to pop out, it's going to look really awesome. Quote Link to comment Share on other sites More sharing options...
Wingman Posted December 7, 2017 Report Share Posted December 7, 2017 Pics would be good! Quote Link to comment Share on other sites More sharing options...
buze Posted December 7, 2017 Author Report Share Posted December 7, 2017 Hi @Wingman I *did* 'finish' this project, for now, I didn't get the depth of colour I wanted, but it's because I ran out of patience and wanted to shoot the gun -- the color picks up quickly to start with, then it takes forever to get more contrast :-) With a light coat of oil it still looks pretty good tho, but I know I need to revisit it, remove the oil and ejector, and treat it again a few times... I'll try to take pics tomorrow, weather permitting. Quote Link to comment Share on other sites More sharing options...
Wingman Posted December 8, 2017 Report Share Posted December 8, 2017 Ok mate just interested what it looks like as might try it myself.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.