new remote control

[tigger got stichs]

dose anybody know if you can get spare remote controllers for the uk shoot warehouse  turbulence rotary machines / or how to convert it from remote to normal as the on button is knackered on mine  

[lakeside1000]

Hi, dont know about the original controller but I fitted these to my flappers and magnet, they are very reliable, have good range , cope with the motor load no problem and are easy to connect as they just go in the cable between battery and unit, correct polarity is essential as they only work if connected the right way round, 

One receiver is on / off the other is just a pulse  so just press and hold for on and release the button to stop. ( I dont use this one but I can see where it might be useful, 

You can phone shoot warehouse for help on the original controller replacement, they are very helpful , I buy bits from them and just phone if there is a problem, 

                                                  Best of luck.

 

This is the hand control and switching unit I have , paste this link into your browser , but its an american site, but you may be able to find a similar one in the uk, Only things you need to know are 12 volt dc only and around 15 amp switching so it dosn't overheat. hope this helps, 

http://clickandlights.com/12v-remote-switch-12v-ouput/

Or ;

https://www.ebay.co.uk/itm/12V-DC-2CH-ON-OFF-LONG-RANGE-REMOTE-CONTROL-SWITCH-RM102P/400749690606?epid=656892385&hash=item5d4e8afeee:g:gasAAOSwcUBYUtWV