aberisle Posted January 29, 2020 Report Share Posted January 29, 2020 Can anyone help me out with some loads for 3" 20 bore loads in powershot. I have pt2092 wads, cheddite cases and longshot, lilgun, steel powders. thanks if anyone who could help. Quote Link to comment Share on other sites More sharing options...
6.5x55SE Posted January 30, 2020 Report Share Posted January 30, 2020 17 hours ago, aberisle said: Can anyone help me out with some loads for 3" 20 bore loads in powershot. I have pt2092 wads, cheddite cases and longshot, lilgun, steel powders. thanks if anyone who could help. Personally I've only ever felt the need to load 70 mm case cx2000 primer 23 grains Alliant Steel Powder B&P 24 wad with 2 x 28ga cork wads below shot 1oz Power Shot crimp closer. Looking at 3" data 23.5 grains of Alliant Steel Powder 1oz of Power Shot but you will need more packer's inside was hope this helps don't hesitate to ask for more Quote Link to comment Share on other sites More sharing options...
aberisle Posted January 30, 2020 Author Report Share Posted January 30, 2020 Quote Thanks for the reply, do you have any data for the PT2092 wads as they are the only ones i have at the moment, i was hoping to load some cartridges for next week so i dont have time to get new wads. cheers ...james Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.