shoot57 Posted February 19, 2020 Report Share Posted February 19, 2020 I have an fx bobcat mk1 fac which is regulated and it is leaking air through the air bleed hole at the bottom so I replaced the 2 o rings that wrap around the regulator but still the air continues to leak, the more pressure I put in the faster the leak. Thinking of stripping the regulator down and replacing the internal o rings, but before I do, if the internal o rings were faulty would air still be coming through the air hole at the bottom of the block ? Quote Link to comment Share on other sites More sharing options...
figgy Posted February 20, 2020 Report Share Posted February 20, 2020 If the other seals needed changing, strip the reg and change them too. Won't harm and may cure the leak, if not it one less you can rule out. Have a watch of Ernest Rowe videos, he tells how to know which seal in the reg is leaking. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.