samboy Posted May 27, 2023 Report Share Posted May 27, 2023 Hi gang. I have taken my Parker Hale mod apart to clean it and now when i put the baffles back in the tube and screw the end cap back on the lining up rod wont go through the baffles. When i undo the end cap all is ok. It's as if something is being squashed and stopping the rod going through. I must have tried 10 times or more. I have put the baffles on the rod and put them in the tube all to no avail. Any ideas chaps ?. Thanks all. Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted May 27, 2023 Report Share Posted May 27, 2023 Hi put the mod end cap and baffles on the rod turn the mod up the way so threaded part is facing down then put the rod and baffles in the mod and then tighten the end cap do not remove the rod before you tighten the cap i hope this helps Quote Link to comment Share on other sites More sharing options...
samboy Posted May 27, 2023 Author Report Share Posted May 27, 2023 46 minutes ago, scarecrow243 said: Hi put the mod end cap and baffles on the rod turn the mod up the way so threaded part is facing down then put the rod and baffles in the mod and then tighten the end cap do not remove the rod before you tighten the cap i hope this helps Just altered the baffles and done what you said and it has seemed to do the trick. Thanks. Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted May 27, 2023 Report Share Posted May 27, 2023 glad to help as been there my self Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.