bagup-sam Posted February 17, 2008 Report Share Posted February 17, 2008 has anyone got any good and effective methods of making your own pheasant feeders? with spirals or whatever? Quote Link to comment Share on other sites More sharing options...
Millomite Posted February 17, 2008 Report Share Posted February 17, 2008 Use a eight inch pipe. Get some endcaps for top and bottom and strap to a post, drill a hole for a spiral in the bottom and away ya go Quote Link to comment Share on other sites More sharing options...
Quickshot Posted February 29, 2008 Report Share Posted February 29, 2008 buy an old chutney drum, drill a hole for a spiral and your done. QS Quote Link to comment Share on other sites More sharing options...
bgrangeb Posted March 31, 2008 Report Share Posted March 31, 2008 same as said above drums used for collecting rainwater with a lid if possible fill with seed and cut a small hole underneath put a spring in the hole reaching nearly to the ground if done right the seed should stay until the spring is hit when a bit should fall out this way only what is eaten comes out... Quote Link to comment Share on other sites More sharing options...
bob300w Posted March 31, 2008 Report Share Posted March 31, 2008 40 gallon plastic drums with a spiral, the bigger that you make them, the less often that you have to fill them! Quote Link to comment Share on other sites More sharing options...
bob300w Posted March 31, 2008 Report Share Posted March 31, 2008 same as said abovedrums used for collecting rainwater with a lid if possible fill with seed and cut a small hole underneath put a spring in the hole reaching nearly to the ground if done right the seed should stay until the spring is hit when a bit should fall out this way only what is eaten comes out... Do you not have a problem with rats and squirrells, having a spring this long? Quote Link to comment Share on other sites More sharing options...
bgrangeb Posted March 31, 2008 Report Share Posted March 31, 2008 well not that ive noticed - didnt mean right at the ground but enough so they can hit it... anyway rats would maybe still get at em found 2 mice in a grain barrel and the only way in was up 1.2m plastic vertical surface.... go figure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.