roger Posted May 2, 2008 Report Share Posted May 2, 2008 Hi All, I'm having a problem with a Yildiz 12b cycling properly and would welcome any ideas any of you may have . I've been using 30grm cartridges without problems, just got some 34grm ones and they eject ok but it trys to cycle 2 rounds. I've no problem when using only 2 rounds, ie one in the barrel and one in the mag. Regards, Roger Quote Link to comment Share on other sites More sharing options...
codling99 Posted May 2, 2008 Report Share Posted May 2, 2008 are they 65 mm ,if so theres your problem,my escort cycles 70 mm carts all day,put 65 mm in,and it to short ,and try to push 2 up,and they get jammed. Quote Link to comment Share on other sites More sharing options...
Devon Fox Posted May 2, 2008 Report Share Posted May 2, 2008 I would bet thats the problem, my escort only eats 70mm carts! Quote Link to comment Share on other sites More sharing options...
roger Posted May 2, 2008 Author Report Share Posted May 2, 2008 many thanks for the replies, what a ******, anyone want a really cheap excellent condition Yildiz special. Roger Quote Link to comment Share on other sites More sharing options...
codling99 Posted May 2, 2008 Report Share Posted May 2, 2008 be better to sell the 65 mm carts,and buy some 70 mm,be cheaper . Quote Link to comment Share on other sites More sharing options...
njc110381 Posted May 2, 2008 Report Share Posted May 2, 2008 It's quite hard to find 70mm field shells. Most are 67.5! It's a real pain in the **** if you use an auto. Quote Link to comment Share on other sites More sharing options...
The Burpster Posted May 4, 2008 Report Share Posted May 4, 2008 All RC field shells are 70mm..... Never had a missfeed using these. http://www.rc-cartridges.com/ Quote Link to comment Share on other sites More sharing options...
2shots Posted May 4, 2008 Report Share Posted May 4, 2008 take the barrel off and make sure the gas vent holes are clear before you mess about you can see them where the o ring fits into the piece that goes over the magazine,mine had this problem and the smith said the vent was blocked solid so the cycle was not getting the gas and the o ring was burnt. Been ok since Quote Link to comment Share on other sites More sharing options...
taz24 Posted May 4, 2008 Report Share Posted May 4, 2008 Hi All, I'm having a problem with a Yildiz 12b cycling properly and would welcome any ideas any of you may have . I've been using 30grm cartridges without problems, just got some 34grm ones and they eject ok but it trys to cycle 2 rounds. I've no problem when using only 2 rounds, ie one in the barrel and one in the mag. Regards, Roger Not sure about the Yildiz but some semi auto's require you to add an extra thrust washer (or remove) in the piston cycleling thing over the magazine tube. Maybe the Yildiz is the same. Cheers taz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.