nerooo Posted November 26, 2008 Report Share Posted November 26, 2008 i have installed the cabinet inside a cupboard in the left corner ,but i have got a little problem, the cabinet got 6 bolts 4 on the front and 2 on the floor i have been strugling to fit the top right bolt as i couldnt plug all of it,there is a bit of it still out (inside the cabinet of course) which i am a bit worry about it, other wise the cabinet is very well installed and u can feel it is strongly fixed when u try to move it, do you think the fire arm officer wouldnt be happy about it? Quote Link to comment Share on other sites More sharing options...
Billy. Posted November 27, 2008 Report Share Posted November 27, 2008 I'm sure it wont be a problem. On the three occasions I've had mine checked, the FEO has walked in, looked the cabinet up and down, not asked to open it (only once to check serial numbers on guns, but no internal inspection) then he placed his hand firmly on the top and attempted to shake it hard. "That's in good and tight!" Is what I last remember hearing. So I wouldn't worry too much. Do let me know though! Quote Link to comment Share on other sites More sharing options...
TheHunter Posted November 27, 2008 Report Share Posted November 27, 2008 You could use a couple of washers to pull the last bolt tight, but it isn't going to fail if you already have 5 bolts fitted and secure. Quote Link to comment Share on other sites More sharing options...
pbickerd Posted November 27, 2008 Report Share Posted November 27, 2008 Same as these guys. One of my cabinets has one bolt (out of 4) not all the way in. I voluntarily opened up the cab and he peekd in, I didnt specifically mention that it wasnt all the way and he didnt say anything. He grabed the top and had a good go at moving it. It didnt move at all and he just said that I had done a good job and he was happy with it. I wouldnt worry about it too much. Quote Link to comment Share on other sites More sharing options...
nerooo Posted November 27, 2008 Author Report Share Posted November 27, 2008 ok then i ll let you know when he come around,thanks. Quote Link to comment Share on other sites More sharing options...
nerooo Posted November 28, 2008 Author Report Share Posted November 28, 2008 i rang up the fire are departement today, so they said the certificate has been issued on the 26 november and it ll be posted today and i am still waiting for feo to turn up for cheking the cabinet so i dont know how they could issue a certificate in advance, so i hope i ll get by next week hopfully maybe in 2 months you never know Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.