Kikkan Posted May 14, 2009 Report Share Posted May 14, 2009 Hey guys! long time no see :blink: Last year i got the pigeonflapper machine, but im not sure how to use it properly. On the wing end of the flapper, there are 2 "spikes" witch are not that pointy, and i cant see how i can secure the wings to the wingpart. Any tips on how to do this? im aware of that the wings on the pigeon needs to be broken. Thanks Quote Link to comment Share on other sites More sharing options...
Cranfield Posted May 14, 2009 Report Share Posted May 14, 2009 This is my electric flapper. The centre rod passes through the birds vent and into the back of its head. The upturned ends of the outer arms just pass through the feathers at the end of the wings. Quote Link to comment Share on other sites More sharing options...
activeviii Posted May 15, 2009 Report Share Posted May 15, 2009 it wouldn't be from site sponsor would it? I bought one a little while ago and had to take a file to the wing wires as they looked like the back end of a pencil. i then found some air line from the fish tank and cut a couple 20mm bits. i brake the wing with pliers, as i was cut one time with a bone as i snapped them. slide the bird onto the middle spike, from vent to head then push the wings onto the spike at the top of the white wing bar and push the tube over the spike, this holds the wings in place. put the flapper on is stand and push into ground push head onto spike and brush feathers down. right or wrong it works for me. Phil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.