straightshooter1 Posted July 20, 2009 Report Share Posted July 20, 2009 hi guys just got myself the above great semi but it won't unload it ejects the first one then thats it no problem cycling though any help would be apreciated Quote Link to comment Share on other sites More sharing options...
tweedledee Posted July 21, 2009 Report Share Posted July 21, 2009 did you try 30/32g shells mate.i liked the fabarm and nearly had one bought myself but i had heard a few horror stories about them.are you saying it ejects the first shell but not bringing the second one out of the tube??are the gas ports clean enough?? Quote Link to comment Share on other sites More sharing options...
v-max Posted July 21, 2009 Report Share Posted July 21, 2009 hi guys just got myself the above great semi but it won't unload it ejects the first one then thats it no problem cycling though any help would be apreciated Do you mean when you load it up ie 1 cartridge in barrel & 2 in the tube/mag when you pull back the carrier it emptys the barrel & donsent cycle a case out the tube??. If so thats normal unlike some older semi autos that cycle without being shot but manually cycled. Quote Link to comment Share on other sites More sharing options...
monkeymagic1969 Posted July 21, 2009 Report Share Posted July 21, 2009 Do you mean when you load it up ie 1 cartridge in barrel & 2 in the tube/mag when you pull back the carrier it emptys the barrel & donsent cycle a case out the tube??. If so thats normal unlike some older semi autos that cycle without being shot but manually cycled. To get the 2 in the tube out, you release them by pressing the button Quote Link to comment Share on other sites More sharing options...
straightshooter1 Posted July 21, 2009 Author Report Share Posted July 21, 2009 (edited) To get the 2 in the tube out, you release them by pressing the button what I mean is semi is fully loaded and I want to empty it by manually cycling the rounds out it ejects the first round that is chambered but not cycle the ones in the tube tried pressing the button it doesn't work Edited July 21, 2009 by straightshooter1 Quote Link to comment Share on other sites More sharing options...
v-max Posted July 22, 2009 Report Share Posted July 22, 2009 what I mean is semi is fully loaded and I want to empty it by manually cycling the rounds out it ejects the first round that is chambered but not cycle the ones in the tube tried pressing the button it doesn't work :unsure: Ok i know what you mean so here goes if you look at the breech bolt release button ie the 1 you push to make it close to load it. If you look at it you will see it has 2 points of grip a bigger pad you push & a smaller bit that slopes with enough grip on for your finger tip. If you turn the auto up side down with the carrier looking up to you & the breech bolt button on the side which will be on your left (for a right hand gun). If you look down at the button on the side & use the grip point on the button to pull it back to you/butt of gun. This will make it work out wards & you need to push the carrier down at same time & place your thumb on the cartridge in the tube & push it in lightly to take pressure off the buttons claw inside holding the cartridge & this should work. Dont know if you know but the carrier has a wee groove (for a little finger) at the back edge push it back when gun is empty & this will lock back the action & it will click. You can load the tube/mag then push the carrier back & it will release a cartridge under the breech bolt & all you need do is cock/pull/cycle the action & it will pick up the shell but watch your finger as the cartridge can give you finger nail a nip hope this helps. You really should read the instructions & it will make sense as it got me too at first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.