Nel Posted July 29, 2009 Report Share Posted July 29, 2009 I noticed when cleaning the barrel there are two small notches on the inside where the Gas Cylinder is spot-welded/welded on to the underside of the barrel. Is this normal / safe / acceptable? It fires fine! I'll try & take a picture tomorrow. thanks for any help Quote Link to comment Share on other sites More sharing options...
vmobiler1 Posted July 29, 2009 Report Share Posted July 29, 2009 I think your on about the gas ports on the barrel, this is perfectly normal if you can see them when looking through the barrel when cleaning etc Hope this helps Quote Link to comment Share on other sites More sharing options...
Zapp Posted July 29, 2009 Report Share Posted July 29, 2009 Yep, vmobiler is right. What you are looking at are the holes in the barrel that vent off the gas that recycles the action. Worry not, there is nothing wrong with your gun whatsoever. ZB Quote Link to comment Share on other sites More sharing options...
Nel Posted July 30, 2009 Author Report Share Posted July 30, 2009 Great, thanks for the help & reassurance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.