-
Posts
3,083 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by delburt0
-
-
I've seen this bird and it's looks are untrue, a totally non marked beautiful bird.
-
-
Costa or douwe egberts in the tin for the filter, from tesco do it for me ..
-
Good offer I'm after on for the garage but a bit far.. Good luck Bryan ...
-
It's these I want as it's a modern gun thanks for this Neil, hope your keeping well thought you had hibernated :-)
-
Big thanks to Paul for the decoys a pleasure to meet...
-
Cheers Paul :-)
-
Workin while Sunday from weds
-
Lol gass my air con and mums the word ;-)
-
Good choice Paul...
-
You have pm.
-
If there like the sx3 they come with 1/4-1/2-3/4.
Below should be sxp unless anymore purchased which would be a bargain...
INVECTOR-PLUS CHOKE TUBES
From the duck blind to the firing line, the Invector-Plus choke tube system is the worlds favorite. The Super X® Pump comes with full, modified and improved cylinder flush-mounted tubes so your gun is ready to shoot right out of the box.
-
Looked at these cannot find any modern stuff.
-
Has anyone got a link to where I can date modern winchester shotgun through the serial number.
-
Took the gun back to the shop this morning, after inspection it was agreed that there was no chrome but a line of bare metal,
Got a exchange for a new sx3 this one looks faultless (for. Now)...
-
They look very nice dogs, I broached this thread yesterday to a solid no, I have one blue roan cocker boy 3 yrs but even they are not known to be aggressive I would not find it fair re homing 2 brothers that obviously get on, I wouldn't find it fair on my boy..
Would just love if these boys went to a known name on here.
-
I like cats can't see the dog been impressed though.
-
Go on Shaun they'll have a good home and I'm sure they will get on :-)
-
+1Same, unless you are pest controlling you don't have to shoot them all, I have had deer come in close they are almost embarrassed when they have seen me and legged it off.
I have watched loads of hares when out stalking but have never shot one, we do have them here but not in any number to cause a problem to anyone.
-
That's why it's going back tommorow for inspection from the gunsmiths.I see from your post that you think that a greater problem than fouling may exist, a solution to which should be sought from a gunsmith.
All my guns are spotless and unmarked, tubes are flawless had them all for many years.
I was not having a go over making cleaning products just think improvising with washers etc goes against any warranties given if anything went wrong.
Atb del...
-
My thought now of after many years of shooting and cleaning I would have got rid of this with at least 6 constant hours of trying the one same patch.
-
I take it you don't buy new guns.I put this on another earlier thread, try it out, not much effort needed in operation.
It looks to me as if it is sitting in the barrel in lumps, if it is I have had similar fouling on a much smaller scale on my o/u and what I used to remove it was this. I made up a tool by taking an old worn out bronze brush, unscrewing the metal spiral from the Parker Hale part then finding a suitably sized steel washer, just a little larger than the p/h holder diameter and putting a precision edge on the washer using wet and dry paper on a flat board, screw this to the holder with what I believe was a BA threaded screw fix the assembled tool to your cleaning rod and gently scrape away! Worked a treat for me, but use with care.
-
I do not think this is fouling but a (Friday afternooner) it looks as though it is down to bare metal giving a cast iron look compared with the chrome,I put this on another earlier thread, try it out, not much effort needed in operation.
It looks to me as if it is sitting in the barrel in lumps, if it is I have had similar fouling on a much smaller scale on my o/u and what I used to remove it was this. I made up a tool by taking an old worn out bronze brush, unscrewing the metal spiral from the Parker Hale part then finding a suitably sized steel washer, just a little larger than the p/h holder diameter and putting a precision edge on the washer using wet and dry paper on a flat board, screw this to the holder with what I believe was a BA threaded screw fix the assembled tool to your cleaning rod and gently scrape away! Worked a treat for me, but use with care.
And as for your question will I've never been much good so I could probably use a flintlock and not notice lol ;-)
-
Least it's near it's hole.Lol my misses has buggs bunny on her bum cheek, a bit off putting if you know what I mean.
I like it, different - tattoos are allowed some artistic licence and its not always meant to look exact
4 very happy customers!
in Sporting Pictures
Posted
Well done Chris great day....