ronttuk Posted September 14, 2005 Report Share Posted September 14, 2005 anyone know how to get my s-16 back up to 11.7 ft lbs as its dropped to 9.8 ft lbs thanks guys Quote Link to comment Share on other sites More sharing options...
SNAKEBITE Posted September 14, 2005 Report Share Posted September 14, 2005 anyone know how to get my s-16 back up to 11.7 ft lbs as its dropped to 9.8 ft lbs thanks guys Go to a Gunsmiths. Not worth messing around with yourself if you are not sure what to do. Axe thinks he might have the same problem and posted a similar thread on Friday. Have a word with him, he might have heard something. Quote Link to comment Share on other sites More sharing options...
roblade Posted September 14, 2005 Report Share Posted September 14, 2005 if your the original owner i think logun offer life time warentee on these rifles so might be worht while having a chat with them about it. You sure you used the correct pellet weight? ROB :( Quote Link to comment Share on other sites More sharing options...
Axe Posted September 14, 2005 Report Share Posted September 14, 2005 Just to let you know, you dont have to be the original owner to get the lifetime warranty, you simply need to send the rifle of for a logun service. :( Axe. Quote Link to comment Share on other sites More sharing options...
ronttuk Posted September 14, 2005 Author Report Share Posted September 14, 2005 i know i can send it back to logun but it takes weeks!!! im using logun penetrater pellets Quote Link to comment Share on other sites More sharing options...
Axe Posted September 14, 2005 Report Share Posted September 14, 2005 I was under the inpression that the penatrators were designed for use in FAC rifles. I'm not sure if they would have much effect in reducing the power output, due to the way a PCP works. Have you tried Accupels, Logun recomend them in the s-16 and thats what I use. I havent had any problems with them yet. Regards, Axe. Quote Link to comment Share on other sites More sharing options...
Ferret Master Posted September 14, 2005 Report Share Posted September 14, 2005 Hi, Peneatrators aren't always fac pellets, you get 2 weights in .22 16 for sub 12 footers and 20 grain for fac. FM :( Quote Link to comment Share on other sites More sharing options...
ronttuk Posted September 15, 2005 Author Report Share Posted September 15, 2005 i use to use accupelss but i find the penetrater much harder hitting and just as accurate Quote Link to comment Share on other sites More sharing options...
Axe Posted September 15, 2005 Report Share Posted September 15, 2005 Hi, Peneatrators aren't always fac pellets, you get 2 weights in .22 16 for sub 12 footers and 20 grain for fac. FM :( Cheers for the correction FM :blink: Quote Link to comment Share on other sites More sharing options...
Dougie_fn12 Posted September 15, 2005 Report Share Posted September 15, 2005 if using the 16.0g logun penetrators in your s16 you should get a higher ftlb/fps reading over a chronograph,as the pellet is heavier you get more power in pcp rifles and lightweight pellets in springers,as its a s16 and they do have seal problems,have you checked the o-ring seal on the bottle to make sure that is not leaking? as for penetrators the magazines do not really like these pellets, i have used accupells and verminpells to great affect,simon gibbons at logun will direct you in the right direction hope this is of some help :( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.