BESS7003 Posted February 10, 2010 Report Share Posted February 10, 2010 Hello, has any one fitted a lamp onto a shotgun if so what type, can it be done?? Thanks Jim Quote Link to comment Share on other sites More sharing options...
Beardo Posted February 10, 2010 Report Share Posted February 10, 2010 deben do a shotgun barrel mount... http://www.deben.com/lights_lamping/lightf...cope_mounts.php there are also cheap ebay ones that work with velcro for torches Quote Link to comment Share on other sites More sharing options...
Colster Posted February 10, 2010 Report Share Posted February 10, 2010 http://www.dealextreme.com/details.dx/sku.12000 They also do Ultrafire torches with pressure switches. The torches are only about £9 delivered and unfiltered good to about 200yards. Quote Link to comment Share on other sites More sharing options...
bigjohn Posted February 10, 2010 Report Share Posted February 10, 2010 Lightforce also do a shotgun mount for their lights, although the illumination their lamps produce is a little OTT for a shotgun. Quote Link to comment Share on other sites More sharing options...
Westcountryman Posted February 10, 2010 Report Share Posted February 10, 2010 I have a scope mounted light. I just put some rubber inner tube on my lower barrel and clip the scope mounting over that. Works a treat. Quote Link to comment Share on other sites More sharing options...
gottsy boy Posted February 10, 2010 Report Share Posted February 10, 2010 my mate has done it with pipe clips i think he used 22mm it worked with his deben max tracer on 410 hushpower.. Quote Link to comment Share on other sites More sharing options...
THEINVISIBLESCARECROW Posted February 10, 2010 Report Share Posted February 10, 2010 The Deben one I had was no more than a fancy bulldog clip but worked well enough. The Lightforce one is more sturdy. Better off with a mate with a hand held lamp though. Quote Link to comment Share on other sites More sharing options...
vole Posted February 11, 2010 Report Share Posted February 11, 2010 I had a Deben one. You have to make sure you get the adapter clamp too though. I got rid in favour of just holding an LED torch which is plenty of range if rabbit shooting and it saves all the clutter on your gun. Quote Link to comment Share on other sites More sharing options...
bicykillgaz Posted February 11, 2010 Report Share Posted February 11, 2010 (edited) i had a lightforce mount on my hatsan escort and it was a good set up, but now i have a torch with pressure switch mounted on the barrel of my hushpower and its great Edited February 11, 2010 by bicykillgaz Quote Link to comment Share on other sites More sharing options...
rad334 Posted February 11, 2010 Report Share Posted February 11, 2010 I have a scope mounted light. I just put some rubber inner tube on my lower barrel and clip the scope mounting over that. Works a treat. I also use a scope mountable light and just pack the mount with a piece I cut off a belt so it clips onto my semi-auto barrel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.