foxnet22 Posted April 28, 2010 Report Share Posted April 28, 2010 (edited) hi lads have been changing discks and pads on my l200 .thing is i was removing the caliper and the 2 bolts snapped inside the brake caliper slider pin .have been able to remove them with an extractor might be a long shot but has any l200 owners got any of these bolts lying around in the workshop . they have a 14mm head and are around an inch in length. Edited April 28, 2010 by foxnet22 Quote Link to comment Share on other sites More sharing options...
J@mes Posted April 28, 2010 Report Share Posted April 28, 2010 They are probably high tensile bolts too, as they are holding a brake component on. get to a local nut and bolt place (on your bike if you don't have another motor) and get them matched up! I will say that when I needed new caliper bolts for my mitsubishi evo, the bolts were NOT a standard thread size. Quote Link to comment Share on other sites More sharing options...
Budice Posted April 28, 2010 Report Share Posted April 28, 2010 Some brake pad sets will come with new bolts if not off to the dealers to get the right ones mate Quote Link to comment Share on other sites More sharing options...
squirrell Posted April 28, 2010 Report Share Posted April 28, 2010 (edited) hi lads have been changing discks and pads on my l200 .thing is i was removing the caliper and the 2 bolts snapped inside the brake caliper slider pin .have been able to remove them with an extractor might be a long shot but has any l200 owners got any of these bolts lying around in the workshop . they have a 14mm head and are around an inch in length. join this forum and see if anyone can help. The forum for the l200's is down near the bottom http://www.pocuk.com/forums/ Edited April 28, 2010 by squirrell Quote Link to comment Share on other sites More sharing options...
Moors Man Posted April 29, 2010 Report Share Posted April 29, 2010 (edited) join this forum and see if anyone can help. The forum for the l200's is down near the bottom http://www.pocuk.com/forums/ Try Milner Off Road. I found them great. http://www.milneroffroad.com/Default.asp?c=29489 Depending on which bolt £8 / 9 for a K76 model see below. You get next day delivery too. http://www.milneroffroad.com/categories.asp?cID=11409 Edited April 29, 2010 by Moors Man Quote Link to comment Share on other sites More sharing options...
Kilvy Posted April 29, 2010 Report Share Posted April 29, 2010 Try Milner Off Road. I found them great. http://www.milneroffroad.com/Default.asp?c=29489 Depending on which bolt £8 / 9 for a K76 model see below. You get next day delivery too. http://www.milneroffroad.com/categories.asp?cID=11409 +1 ... Very helpful and dirt cheap! Quote Link to comment Share on other sites More sharing options...
foxnet22 Posted April 29, 2010 Author Report Share Posted April 29, 2010 thanks for the reply lads.been on to my local dealer today hopefully get them tommorow.as of milners 4x4 got my discks and pads from them and must say 10 out of 10 for service thanks to members who pointed me in the right direction.once again pw members to the rescue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.