Jump to content

FAC Rapid 7 mk 1 Accuracy ?


Salop Matt
 Share

Recommended Posts

I have my FAC mk1 rapid up and running now with my scope on and power set !

 

How ever I am getting mixed results from it accuracy wise ! What should I be looking at ?

 

Iv only zeroed rimfire before and once a AA S410 that was BTAS regged that puts pellet on pellet !

 

So what should i expect at 40yards with my rapid being unregged ?

Link to comment
Share on other sites

I have my FAC mk1 rapid up and running now with my scope on and power set !

 

How ever I am getting mixed results from it accuracy wise ! What should I be looking at ?

 

Iv only zeroed rimfire before and once a AA S410 that was BTAS regged that puts pellet on pellet !

 

So what should i expect at 40yards with my rapid being unregged ?

You should get as good as the 410 , some Rapids are a pain in the a.. to get right but once you do will last forever.

Link to comment
Share on other sites

With the higher power the rapids can get very pellet fussy.

Try as many pellet types as you can untill you strike gold, pellet on pellet at 40yards is acheivable. ???

Bisley manums usualy groupe well at most power settings but you may wish to find something a bit lighter to flattern trajectory out a bit.

I can get one hole groupes with bisley magnums and also logun penatrators(16grain) with the latter being much flatter. i tryed countless pellets when setting my outfit up, many wouldn't groupe under 5 inch at 40yards :good:

my rifle is running at around 36ft/lb

 

atb Ian

Link to comment
Share on other sites

FAC ones need a good clean of the tube from time to time, is it FAC or 12ft lb? if FAC you need Bis mags or similar lightweight stuff only good to limited ranges then groups seem to just open up they can be pellet fussy as well as the tube needing to be cleaned then get re-leaded with the same pellets you are using

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...