Dave-G Posted February 27, 2006 Report Share Posted February 27, 2006 I've been given a half decent swivel armchair, but it's too low for the breakfast bar that I use my PC on. I currently use a breakfast bar stool. I need to raise it about 6 inches and the base comes off easily enough to extend the gas ram tubing. I'm sure there's a few guys on here can do a little foreigner? Any prices please ? Price should include paypal commision and recorded postage so you know I received it if its signed for. Thanks in advance Link to comment Share on other sites More sharing options...
Hunter Posted February 27, 2006 Report Share Posted February 27, 2006 If you can wait a few months id do it for you for pretty much nothing.. as il have a few machines then Only real cost is matirial. Thats a 1 hour job, or less if your used to your machine. Link to comment Share on other sites More sharing options...
Dave-G Posted February 27, 2006 Author Report Share Posted February 27, 2006 (edited) Thinking aboudit... This could be made from two pieces of tight fitting steel tube telescoped and screwed together - 50mm I'D in 50mm O/D Anyone able to sort this for me? Edited February 27, 2006 by Dave-G Link to comment Share on other sites More sharing options...
Hunter Posted February 27, 2006 Report Share Posted February 27, 2006 Not many people have thread cutting kit to that kind of size... its very expensive. Link to comment Share on other sites More sharing options...
old rooster Posted February 27, 2006 Report Share Posted February 27, 2006 I'll have a look see if I've some aluminium tube big enough in the scrap box. Get back later today. You could always use a bit of tube that fitted tightly inside the existing tube ? Link to comment Share on other sites More sharing options...
Dave-G Posted February 27, 2006 Author Report Share Posted February 27, 2006 (edited) OOPS - I meant screwed (through) together, hunter I think I have found someone on ebay selling offcuts that get left in a lathe after a job... so he can get the work done for me He's getting back to me tonite. Dont matter if they are different materials. Old rooster - yip thats the plan now. Thanks all. Edited February 27, 2006 by Dave-G Link to comment Share on other sites More sharing options...
Recommended Posts