wildfowler.250 Posted February 26, 2011 Report Share Posted February 26, 2011 TJ I had my 10 opened up from ful/full to 1/4 and a 1/2 for using steel by W.Richards at Pocklington £35 per barrel Chris is a great fella and they get any work I can't handle. I have uggins of recipes for the 10 in lead,steel,bismuth,and tungsten,.I'm not a gazillion miles from you and have a mec steelmaster and hand loading tools for the 10 and I'd be happy to show you how to go on. Just out of interest what 10 have you got did you end up getting that greylag you were interested in?,if so the chokes'll open up and you'll be able to use steel without having to worry. Mike... Hi mate, I was just wondering if you could send me some lead 10 bore recipes please? My gun is 1/4 choke. I'm currently looking into starting reloading. I was also going to try and make a duck load as well. Do you bother with this? I was also wondering if there are any books you would recommend? ATB! Quote Link to comment Share on other sites More sharing options...
Guest cookoff013 Posted February 26, 2011 Report Share Posted February 26, 2011 I'm in N/E Scotland but thanks very much for the offer How much would it likely cost me to reload a heavy lead load for geese? Say no. 3 shot? I'm trying to get my head round everything before I start buying all the gear I assume I'll get my money back on the equipment if I buy second hand and sell on. ATB! what cartridge would you want for geese? what chamber size? 36g #4 or 42g BB ? cost would actually be cheaper than factory on these beasts. you wouldnt need to buy much, wads, primer cases, all can be had for under £20/ 100. ie £20, should buy wads hulls and primers, and powder card. http://www.siarm.it/product_info.php?cPath=96_99_107&products_id=468 - as a 36g load it with #4. and it should be very good. http://www.siarm.it/product_info.php?cPath=96_99_107&products_id=549 -as a 42g load of #1 or BB. will spank most game thats if you want big loads. Quote Link to comment Share on other sites More sharing options...
Magus69 Posted February 26, 2011 Report Share Posted February 26, 2011 Hi mate, I was just wondering if you could send me some lead 10 bore recipes please? My gun is 1/4 choke. I'm currently looking into starting reloading. I was also going to try and make a duck load as well. Do you bother with this? I was also wondering if there are any books you would recommend? ATB! PM on it's way fella. Mike... Quote Link to comment Share on other sites More sharing options...
Tim2681 Posted June 14, 2013 Report Share Posted June 14, 2013 Hello, Magus69 i know its a bit cheeky but could you forward me the reloading data for 10 bores please? Thanks. Quote Link to comment Share on other sites More sharing options...
Penelope Posted June 14, 2013 Report Share Posted June 14, 2013 Gents, If it's of any interest there is a thread on the Guns & Equipment section (Shooting Auction of Interest) where there are quiet a few lots of 8, 10 and 4 bore cartridge and cases to be had. I'd post the link but I'm not able to. I suspect they are lead loads, but would be ok inland in Scotland. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.