markm Posted April 6, 2011 Report Share Posted April 6, 2011 (edited) Due to move into out PFI in sept and we are getting (mostly) new stuff, below is a list of equipment we plan to get rid of. All 'heavy machinery' is 3 phase but due to the age cannot be used in school due to extraction (and/or) brake speeds but is perfectly fine for other use. All others are fine / in full working order / normal school use and most have been serviced yearly. The LEA are more than happy for us to get rid of the stuff as they want the school flattened within 3 months so I was just wondering if you, or you know anyone who might be interested in anything at a real bargain price. The following are available to go now (disconnected) - Buffer Woodwork lathe (boxford training) The following will be available in the summer - 1x Denford novamill 2 x Circular saws 2 x Pillar drills Sharp edge Planer / thicknesser 2 x Extraction units Flamefast crucible Sewing machines (Bernina 1000's) Injection moulder Vacuum formers (1 x 1/2 sheet) If you want exact details & photos I am more than willing to send them to you via email. Edited April 7, 2011 by markm Link to comment Share on other sites More sharing options...
Rowdy Posted April 6, 2011 Report Share Posted April 6, 2011 Hi Any more detail on the drill press ? Many thanks, Rowdy Link to comment Share on other sites More sharing options...
straightshooter1 Posted April 6, 2011 Report Share Posted April 6, 2011 hi there interested in the: Buffer 1 x Circular saws 1 x Pillar drills Sharp edge Planer / thicknesser if the price is right please pm me Link to comment Share on other sites More sharing options...
CZ550Kevlar Posted April 6, 2011 Report Share Posted April 6, 2011 Interested in the Lathe. Link to comment Share on other sites More sharing options...
rabbithunter Posted April 6, 2011 Report Share Posted April 6, 2011 can i ask whats the biggest size of size that will fit in the Vacuum former Link to comment Share on other sites More sharing options...
webber Posted April 6, 2011 Report Share Posted April 6, 2011 I'm not interested in any of the machines, but it would be useful if you indicated if the machines were single or 3 phase electrics. webber Link to comment Share on other sites More sharing options...
moz Posted April 6, 2011 Report Share Posted April 6, 2011 (edited) Be interested in a sewing machine a pillar drill and the Denford novamill if you can give me more details Edited April 6, 2011 by moz Link to comment Share on other sites More sharing options...
markm Posted April 6, 2011 Author Report Share Posted April 6, 2011 (edited) Just to clarify the heavy machines are 3 phase as per the original post. The pillar drills are both floor standing (£90 each) 2 circular saws are what I would call a 'table circular saw' and not hand held, they are full size steel / cast iron. (£150 each) Thicknesser/planer, same as saws (size and weight) (£150) Lathe (£100) Large sheet vac former, I think the sheet size is about 550x400, I will check in the morning, it also has a 1/2 sheet adapter (£150) Denford Novamill (£200) Sewing machines (£50) Sharp edge (£70) Buffer (floor mounted, cast metal, lamp attached) (£70) I have had loads of pm's as well as posts here so I thought this was easier to update. Summer collection will be during July Stuff mentioned is available now Payment by cheque on collection of goods from Newcastle city centre I think the prices are very fair, infact a bargain, eg - de ford nova mills were £6,000 + new. Edited April 6, 2011 by markm Link to comment Share on other sites More sharing options...
thinxs Posted April 6, 2011 Report Share Posted April 6, 2011 Any chance of a picture of the circular saws? Please. Link to comment Share on other sites More sharing options...
markm Posted April 6, 2011 Author Report Share Posted April 6, 2011 If anyone (additionally to those who have already) is genuinely interested PM your email address. No tyre kickers please. Link to comment Share on other sites More sharing options...
daddypigsaw Posted April 7, 2011 Report Share Posted April 7, 2011 Interested in the mill, the vac former and injection moulder. PM sent. Link to comment Share on other sites More sharing options...
markm Posted April 7, 2011 Author Report Share Posted April 7, 2011 (edited) Full sheet vac former sold without any questions (£5200 worth of kit for £200) 4 sewing machines also sold. More new addition - Band saw £130 (floor standing, not metal cutting 2 x hegner scroll saws (mains voltage) £40. I might have 2 more. Belt sander with built in extraction. (floor standing). I hope I have replied to all messages and or emails so far. Edited April 7, 2011 by markm Link to comment Share on other sites More sharing options...
S1ST Posted July 3, 2011 Report Share Posted July 3, 2011 Do you still have the Novamill? I might be interested in whatever else you have left. Link to comment Share on other sites More sharing options...
markm Posted July 3, 2011 Author Report Share Posted July 3, 2011 Still got Circular saws Thick/plane Sharp edge Pillar drills Polish wheel Metal lathe Link to comment Share on other sites More sharing options...
Recommended Posts