Jump to content

bipod


pull-bang-miss
 Share

Recommended Posts

Right, get a Swivel version or don't bother getting one at all, and if you are not sure about size get a 9-13 if you intend PRONE only or about a 12-25 if you want prone/sit/kneel and the crops are getting higher... if you want more then consider sticks....

 

If you are a committed shooter bite the bullet and get a Harris, if this is a whim or maybe a passing phase, then frankly just get the cheapest you can find.

 

ATB! :good:

Edited by Dekers
Link to comment
Share on other sites

I have a UTG thing from jsrammsbottoms it's quite good, keeps steady but is limited for movement. But it's fine for targeting and the odd few bunnies. It Also looks pretty good as it doesn't have springs all over, an look like a motorbike centre stand

Edited by dan-250
Link to comment
Share on other sites

It's turns a little either way if that's what you mean, so say on a clock 5 to - 5 past. If you loosen the bottom bolt a tad as it comes nipped up but has an o run there which keeps the tension and not to easy to move and flap about. I can get some pics of mine if you like ?

Edited by dan-250
Link to comment
Share on other sites

I have bought 2 of the fleabay both are 9 to 13inchs and tilt from side to side which helps wth unlevel ground i have never seen one that has a panning system unless attached to a vehicle and the rifle is on a pole. the ones i have all i have done is filed the locking bolt which clamps it down so like i say i have files it to a dull point to sit better in the smal hole for it ti match into and it stops the thin bolt wavering off so gives it a better locking to the gun apart from that i have no compaints and for under £27 delivered not bad i have one on my centerfire and one on my Hmr so they get lots of use.

Link to comment
Share on other sites

I have bought 2 of the fleabay both are 9 to 13inchs and tilt from side to side which helps wth unlevel ground i have never seen one that has a panning system unless attached to a vehicle and the rifle is on a pole. the ones i have all i have done is filed the locking bolt which clamps it down so like i say i have files it to a dull point to sit better in the smal hole for it ti match into and it stops the thin bolt wavering off so gives it a better locking to the gun apart from that i have no compaints and for under £27 delivered not bad i have one on my centerfire and one on my Hmr so they get lots of use.

 

Which was them buddy, they sound good ?

Link to comment
Share on other sites

Hi all,

 

Im after a bipod but really dont fancy shelling out £60+ on one. Ive seen the cheap sort on e-bay, are these any good or am i best just biting the bullet and buying either a deben or a harris?

 

Thanks

try global rifles hes a mate of mine. quote"These Snipersystems bipods are so much better than Harris,

and much better made"

James- of James Purdey and Sons.

 

www.snipersystems.co.uk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...