colin lad Posted August 13, 2012 Report Share Posted August 13, 2012 just picked up a 410 hush power s/h took it out for a little blast when i got home it sounds like there is something in the mod , when you lift gun then point down you can hear little bits of something in the mod, so is this normal and if so are they easy to take apart to clean any help would be great thanks colin Quote Link to comment Share on other sites More sharing options...
daz2202 Posted August 13, 2012 Report Share Posted August 13, 2012 Mine does not make this type of noise. Get it checked Quote Link to comment Share on other sites More sharing options...
colin lad Posted August 13, 2012 Author Report Share Posted August 13, 2012 sounds like there is some grit or crud from cart in it, i could best describe it like getting a length of tube put a little sand in it and point it up and down. have you taken your mod apart to clean it at all?? colin Quote Link to comment Share on other sites More sharing options...
ajb403 Posted August 13, 2012 Report Share Posted August 13, 2012 Mine does the same, it's a couple of bits of shot that get through the holes in the barrel into the mod. To clean it just unscrew the mod and slide it off. Quote Link to comment Share on other sites More sharing options...
colin lad Posted August 13, 2012 Author Report Share Posted August 13, 2012 Mine does the same, it's a couple of bits of shot that get through the holes in the barrel into the mod. To clean it just unscrew the mod and slide it off. thanks mate i did think about trying to take mod off but not sure if you could or not didn't want to break it trying looked on youtube but there wasn't anything about how to do it colin Quote Link to comment Share on other sites More sharing options...
drut Posted August 13, 2012 Report Share Posted August 13, 2012 Mine does the same, it's a couple of bits of shot that get through the holes in the barrel into the mod. To clean it just unscrew the mod and slide it off. I've had the same,something to remark upon rather than worry about.Mod just unscrews(normal thread) but can be very tight.I use a "Boa Constrictor" http://www.amazon.co.uk/Misc-Boa-Constrictor-Strap-Wrench/dp/B0001P0EUA Saddlery & Gunroom recommend some fouling to aid silencing,it can be a mistake to clean too often. Quote Link to comment Share on other sites More sharing options...
colin lad Posted August 13, 2012 Author Report Share Posted August 13, 2012 I've had the same,something to remark upon rather than worry about.Mod just unscrews(normal thread) but can be very tight.I use a "Boa Constrictor" http://www.amazon.co...h/dp/B0001P0EUA Saddlery & Gunroom recommend some fouling to aid silencing,it can be a mistake to clean too often. thanks just ordered one colin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.