sterling Posted December 7, 2012 Report Share Posted December 7, 2012 Hi all, Do any of you kind folks have reloading data for 11/16oz or 3/4oz .410? I'm solely interested in loads using alliant 2400. I'm fairly certain a load in the region of 14.5 grains would be around the goal post. Many thanks! Quote Link to comment Share on other sites More sharing options...
stu nesling Posted December 7, 2012 Report Share Posted December 7, 2012 i dont know much about .410, but that seems a damn heavy load for it!! Quote Link to comment Share on other sites More sharing options...
sterling Posted December 7, 2012 Author Report Share Posted December 7, 2012 i dont know much about .410, but that seems a damn heavy load for it!! Yep, it is, but this isn't your average shot shell. Don't worry though, I know what I'm doing (minus the exact data). Quote Link to comment Share on other sites More sharing options...
deershooter Posted December 7, 2012 Report Share Posted December 7, 2012 I have loaded 14.5 grains of 2400 with 19 grams(11/16 oz ) it was fine but 21 grams (3/4 oz ) 2400 is to fast and not recommended do not use CX 2000 primers in .410 use mild UEE 684 or CX 50 Deershooter Quote Link to comment Share on other sites More sharing options...
sterling Posted December 7, 2012 Author Report Share Posted December 7, 2012 I have loaded 14.5 grains of 2400 with 19 grams(11/16 oz ) it was fine but 21 grams (3/4 oz ) 2400 is to fast and not recommended do not use CX 2000 primers in .410 use mild UEE 684 or CX 50 Deershooter Thanks a lot, that's exactly the info I was after! I'll be using fiocchi 615 primers, which are fairly cool and seem to perform like CX50's. Total load is just a hair over 19 grams, so I thought it should be safe with 14.5 grains of 2400, I just needed a little reassurance. Thanks again mate! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.