nabbers Posted December 27, 2012 Report Share Posted December 27, 2012 Can I replace this rear wheel bearing on my van myself or do I need special tools, like a puller? Quote Link to comment Share on other sites More sharing options...
bullet1747 Posted December 27, 2012 Report Share Posted December 27, 2012 If your confident you should be able to do it your self Quote Link to comment Share on other sites More sharing options...
nabbers Posted December 27, 2012 Author Report Share Posted December 27, 2012 Trying to find a step by step guide on the web, but cant find anything. Quote Link to comment Share on other sites More sharing options...
boxlock Posted December 27, 2012 Report Share Posted December 27, 2012 its quite an easy job but you will need a press. Quote Link to comment Share on other sites More sharing options...
dazsl Posted December 28, 2012 Report Share Posted December 28, 2012 if they are disc on the rear they are a unit and very easy to do same as the megane Quote Link to comment Share on other sites More sharing options...
beerdeor Posted December 28, 2012 Report Share Posted December 28, 2012 Disc or drum makes no odds really,you will however need some circlip pliers,and accsess to a press hth jim Quote Link to comment Share on other sites More sharing options...
Blacksheep Posted December 28, 2012 Report Share Posted December 28, 2012 I have just done my megane ones , you really do need a press to extract the old bearing and to press on the new one , there is no way you will drift it out , took 12 tons of pressure to shift mine , other than that it's an easy job , Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.