Jump to content

Zeroing - A bit of video I shot with my phone camera


1066
 Share

Recommended Posts

how do you fix the camera to the scope ?

 

This is the first mount I tried - Blue Peter fashion, bits of plastic and a toilet roll tube.

th_scopecam5.jpg

With this set-up I shot this:

 

Then I decided to make a better bracket that will fit on almost any rifle:

th_20130113_143141_zps8192e823.jpg

Here's a still pic, taken through a Sightron S3 8-32 scope set at about 20x. Target is 100yds

th_20120811_131654.jpg

Edited by 1066
Link to comment
Share on other sites

To make the bracket you will need some basic machining skills. I made mine with bits I had laying around. The blocks that clamp on the scope mounts are made from 1/2 square aluminum. I drilled and tapped to take 6mm Allen bolts. The outer tube is made from 5/8 aluminum bar, drilled and tapped 6mm on one end and deep drilled 8mm from the other to take the internal rod.

 

The plate to take the phone is 1/8 aluminum plate. The phone hard case was about £1.50 from Ebay. The phone just clips in or out as required.

 

The phone mounting need to adjust in every way to fit different scopes.

 

Here's a couple of pics that might help.

th_20130113_143208_zps1dfdba8f.jpg

 

th_phonecam5_zps16b92e56.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...