Jump to content

Tikka 223 light


Daany
 Share

Recommended Posts

All you have to do is :-

 

Take the stock off

 

There's a little nut just above the trigger housing

 

Adjust this (from memory anti- clockwise) and this will lighten the trigger as much or as little as you want. Makes a huge difference :)

F228E323-E97E-47A1-B810-A6DE3301E0AD-846

Edited by rimmie
Link to comment
Share on other sites

Hi does any1 no iff you can buy a trigger kit to make the pull lighter I shot a friends cz with a air trigger and the pull was so soft I rely fancy 1 on the tikka

But please don't adjust it to light as that makes for a very dangerous gun.

Also after adjusting don't forget to do the safety checks - slam the bolt hard a few times and drop test the stock. Also check that your safety still works.

Link to comment
Share on other sites

But please don't adjust it to light as that makes for a very dangerous gun.

Also after adjusting don't forget to do the safety checks - slam the bolt hard a few times and drop test the stock. Also check that your safety still works.

+1 forgot to mention this !!!!

Link to comment
Share on other sites

I was going to do all that after I'm not after something stupidly light, just a nice pull, thanks any way

 

You will have to excuse us if we misunderstood, but you did suggest you wanted a (h)air trigger............. "I shot a friends cz with a air trigger and the pull was so soft I rely fancy 1 on the tikka"..............

and as the T3 Lite is not a target tool the suggestion of NOT having a hair trigger for the field was very valid! :good:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...