Frenchieboy Posted August 30, 2013 Report Share Posted August 30, 2013 (edited) Gone to Dodgy Dave! I have a brand new pressure switch that I bought in the hope that it would fit the UltraFire 1800Lm CREE XM-L T6 that I got for lamping but it is a bit small to screw on to the end of my torch I have so is no use to me. http://www.ebay.co.uk/itm/350795563192?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_2018wt_1170 The description says that it will fit the Ultrafire C8 and other models who use same metal moulding case as follows:- Ultrafire C8-Q5, C8-R5, C8-T6, 504B- SuperFire C8-Q5, C8-R5, C8-T6, 504B- Trustfire C8 It cost me £6.15 all told which I am not worried about so if it is of any use to anyone they are welcome to it. I will pay the postage as long as they are willing to put a small donation into a charity box of their choice. The first one to say YES on this thread and then PM me with their postal details will get it. Edited August 30, 2013 by Frenchieboy Link to comment Share on other sites More sharing options...
dodgy dave Posted August 30, 2013 Report Share Posted August 30, 2013 yes ill have it please Link to comment Share on other sites More sharing options...
Frenchieboy Posted August 30, 2013 Author Report Share Posted August 30, 2013 yes ill have it please OK Dave it's yours. PM me with your full postal details please. Link to comment Share on other sites More sharing options...
Amazed Posted August 30, 2013 Report Share Posted August 30, 2013 Shame mate I did the same thing but persisted and made it fit the other cap Works a treat now. Link to comment Share on other sites More sharing options...
Frenchieboy Posted August 30, 2013 Author Report Share Posted August 30, 2013 Amazed - I would be interested in seeing how you made it fit mate. I will not go back on the deal but I might considder getting another if it is not too difficult a job to do! Link to comment Share on other sites More sharing options...
actionman333 Posted August 30, 2013 Report Share Posted August 30, 2013 inside the tail swich housing is what looks like a silver washer with 2 holes in it(the holes are for circlip pliers etc)...undo that with some circlip pliers and the whole switch and tail piece comes out....do the same with the one you have that fits your torch and swap them over? Link to comment Share on other sites More sharing options...
Frenchieboy Posted August 30, 2013 Author Report Share Posted August 30, 2013 inside the tail swich housing is what looks like a silver washer with 2 holes in it(the holes are for circlip pliers etc)...undo that with some circlip pliers and the whole switch and tail piece comes out....do the same with the one you have that fits your torch and swap them over? Thanks for that very useful piece of info, I am sure that other members as well as myself will find it very useful. Link to comment Share on other sites More sharing options...
dodgy dave Posted August 30, 2013 Report Share Posted August 30, 2013 frenchie i will not hold you to the deal if you find it will adapt to yours after all Link to comment Share on other sites More sharing options...
Frenchieboy Posted August 30, 2013 Author Report Share Posted August 30, 2013 frenchie i will not hold you to the deal if you find it will adapt to yours after all I appreciate that Dave but I will not go back on the deal. Anyway I couldn't even if I wanted to as I posted it at 09:34 this morning by 1st Class Post so it should be with you tomorrow or on Monday at the latest. Link to comment Share on other sites More sharing options...
Fisheruk Posted August 30, 2013 Report Share Posted August 30, 2013 Great guys - both of you. Link to comment Share on other sites More sharing options...
Recommended Posts